TBS Tango 2 PRO FPV RC Radio Controller – NDAA Made in the USA
£310.90
This version is NDAA-compliant and made in the USA. Original Made in China Version HERE .
The TBS Tango 2 PRO sets a new standard for FPV radio controllers, combining portability with high-end performance. Featuring full-size folding Hall sensor gimbals, ultra-low latency, and built-in TBS Crossfire, it delivers unmatched control and reliability. With an open-source operating system, unbreakable switches, a built-in battery, and USB-C charging, the Tango 2 PRO is designed for pilots who demand the best. Its compact, travel-friendly design makes it the perfect take-anywhere, fly-anytime controller. NDAA-Compliant for added security and compatibility.
REDEFINING THE REMOTE CONTROL
TBS has been at the forefront of perfecting the interface between drone and mind. The TBS Tango 2 changes how remote controls will be from here on out! Despite being the smallest remote control available, it comes with full size HAL gimbals, full-featured FreedomTX (temporary OpenTX fork), the lowest end-to-end latency of any remote and transmission system, unbreakable 3 & 2-position switches, open source operating system, built-in battery, USB-C charging, and so much more! It’s not just a retouched game controller, it was designed from the ground up for R/C! The form factor and features make it the ideal take-anywhere, fly-anytime remote control.
CROSSFIRE INSIDE
The first radio with TBS Crossfire built in. This significantly lowers your cost, increases reliability and minimizes set up time. And the cherry on top are the LUA scripts being part of the familiar user interface. The antenna swivels out of the way, or doubles as a kick-stand when resting. TBS Cloud ready to go from the start. It all just makes sense.
Features
- Compact and ergonomic All-in-one (AIO) radio
- Full size digitial HALL sensor gimbals
- Ball-bearing Configurable resistance and tension Adjustable throttle & pitch throw (+/- 10 degrees) Spare spring set included for lower tension Foldable gimbal sticks (Pro only)
- Configurable resistance and tension
- Adjustable throttle & pitch throw (+/- 10 degrees)
- Spare spring set included for lower tension
- Foldable gimbal sticks (Pro only)
- Ergonomic and compact design with comfy rubber grips
- Robust, streamlined switches 2x 2-position switches 2x 3-position switches 2x momentary buttons
- 2x 2-position switches
- 2x 3-position switches
- 2x momentary buttons
- TBS Crossfire built-in Up to 1W CRSFShot for lowest latency and most direct response of any remote control available Range of up to 30km / 20mi from the palm of your hand Swivel-antenna that doubles as a kick-stand Up to 12 channels supported
- Up to 1W
- CRSFShot for lowest latency and most direct response of any remote control available
- Range of up to 30km / 20mi from the palm of your hand
- Swivel-antenna that doubles as a kick-stand
- Up to 12 channels supported
- Built-in 5000mAh 1S LiPo with USB-C 2A charging (2.5 hours for full charge)
- Speech audio output with audio jack & haptic vibration alert
- Open Source remote control operating system (FreedomTX, temporary fork of OpenTX)
- Rocker dial and 3 button menu for super simple navigation
- High resolution (128×96) black & white OLED screen w/ backlight
- Digital rocker dial trim
- 100+ model memory with included SD-card
- TBS Cloud compatible
Tango 2 Pro / Tango 2 Comparison – the Pro Version includes folding gimbal sticks:
MORE INFORMATION
Self-support (FAQ)
TBS Tango 2 Manual
Lanyard mount 3D print download
FreedomTX source code
Upgrade / Spare Parts:
Upgrade Gimbal V2
Ummagawd Tango Tape
TBS Tango 2 Nostalgia Shell (Transparent)
TBS Tango 2 – Nostalgia Antenna (Transparent)
TBS Tango 2 – Springs Set
TBS Tango 2 – Travel Limitation Screw Set
TBS Tango 2 Skins
TBS Crown Jewels – M3 Transmitter Stick Ends
TBS Tango 2 – Tempered Glass Screen Protector
Travel Bag
Hard Shell Case
Please note the Neck Strap Mount is sold separately – HERE .
TBS Crown Jewels – Upgrade M3 Stick Ends
Carry Case for Tango 2 – HERE
Specifications
- RC system: Built-in TBS CROSSFIRE MicroTX
- Output power: 25mW to 1W
- Frequency Bands: 868MHz (EU, Russia)
- Antenna: Standard full-size TX antenna. Switchable antenna polarization – horizontal / vertical Optional external SMA port
- Holding style: Pinch, thumb, and hybrid friendly
- Default stick mode: Mode 2, throttle and yaw left (user-changeable)
- Display: High-resolution 1.2” OLED-panel, 128 x 96 pixels
- Models: Standard and Pro model. PRO model has folding gimbals
- Battery: Lithium-polymer 3.7V 5000mAh internal battery pack, USB-C charging
- Runtime: Approx. 8 hours
- Channels: 8- or 12-channels (CROSSFIRE)
- Operating range: Variable depending on output power and radio environment
- Gimbals Full-size hall sensor gimbals, Adjustable vertical range, Adjustable spring tension, Foldable sticks (PRO version only)
- Controls: 2x Quad full-size hall gimbals 2x Two-position switches 2x Three-position switches 2x Lower-shoulder momentary buttons 3x Configuration buttons 1x Rocker switch 1x Power-on button
- Ports: 3.5mm headphone audio-jack for OpenTX voice support USB-C for software updates and charging
- Neck-strap mounting: Screw on mount – sold separately
- Speaker: 1W, for OpenTx voice support
- Simulator compatibility: Yes, over USB-C
- Working temperature: 0 – 40 ° C
- Size: W 157 x L130 x H70 mm (H50 mm folded)
- Weight: 345 grams
In the box
- 2x Quad full-size hall gimbals
- 2x Two-position switches
- 2x Three-position switches
- 2x Lower-shoulder momentary buttons 3x Configuration buttons
- 1x Rocker switch
- 1x Power-on button
- 1 x Tango 2
- 1 x Velvet Carry Bag with TBS Logo (Pro Version only)
- 1 x Springs Set ( Default and Lower Tension)
- 2 x Throttle limitation screws (with allen key)
- 1 x Sticker Sheet