{"product_id":"tbs-lucid-h7-fc-flight-controller-2-8s-30-30-ndaa-made-in-the-usa","title":"TBS Lucid H7 FC Flight Controller 2-8S 30×30 – NDAA Made in the USA","description":"\u003cp\u003eThis version is NDAA-compliant and made in the USA. Original Made in China Version HERE .\u003c\/p\u003e\n\u003cp\u003eUnleash the full potential of your drone with the NDAA Compliant TBS Lucid H7 Flight Controller — engineered for peak performance and versatility. Powered by the STM32H743VIH6 MCU running at 480MHz, it seamlessly supports Betaflight, ArduPilot, and INAV, ensuring smooth control and precision. Equipped with dual ICM42688 gyros for ultimate stability, 7 UARTs, dual camera inputs, and DJI FPV OSD compatibility, the Lucid H7 adapts to any build — freestyle, racing, or cinematic. With robust 13 PWM outputs, a dedicated LED pad, and wide 2–8S LiPo support, this flight controller is designed for both seasoned pilots and ambitious newcomers. NDAA-Compliant for added security and compatibility.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for racing and freestyle\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play Connectivity\u003c\/li\u003e\n\u003cli\u003eUser-Friendly Design\u003c\/li\u003e\n\u003cli\u003eSupports 4-in-1 ESCs\u003c\/li\u003e\n\u003cli\u003eVersatile Application\u003c\/li\u003e\n\u003cli\u003eHigh Compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash.\u003c\/li\u003e\n\u003cli\u003eGyro: ICM42688\u003c\/li\u003e\n\u003cli\u003eOSD Chip: AT7456E (SPI2)\u003c\/li\u003e\n\u003cli\u003eBarometer: Infineon DPS310 connected via I2C2.\u003c\/li\u003e\n\u003cli\u003ePWM Outputs: 13 channels, including a dedicated “LED” pad.\u003c\/li\u003e\n\u003cli\u003eBlackbox (BB): Data logging equipped with a MicroSD card slot (SDIO)\u003c\/li\u003e\n\u003cli\u003eUARTs: 7 total (1, 2, 3, 4, 6, 7, 8) signal inversion ready\u003c\/li\u003e\n\u003cli\u003eI2C Buses: 2 available.\u003c\/li\u003e\n\u003cli\u003eCAN Bus: 1 available.\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2).\u003c\/li\u003e\n\u003cli\u003eLED Indicators: 3 LEDs (Blue, Green for FC Status, Red for 3.3V Power).\u003c\/li\u003e\n\u003cli\u003eBreakout: SPI3 breakout available.\u003c\/li\u003e\n\u003cli\u003eUSB Interface: Type-C connector (USB 2.0 standard).\u003c\/li\u003e\n\u003cli\u003eJST Connectors: 1x JST-SH1.0 8-pin (Vbat\/G\/Curr\/Rx8\/S1\/S2\/S3\/S4) 1x JST-GH1.25 4-pin (5V\/CAN-H\/CAN-L\/Ground).\u003c\/li\u003e\n\u003cli\u003eDual Camera Input: Switchable inputs for two cameras.\u003c\/li\u003e\n\u003cli\u003ePower Control: Switch for filtered 5V\/Vbat output power.\u003c\/li\u003e\n\u003cli\u003eDJI FPV OSD: Compatible via any spare UART port.\u003c\/li\u003e\n\u003cli\u003eMount: 30×30\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 6 – 36V (2 to 8S LiPo).\u003c\/li\u003e\n\u003cli\u003eBEC: 5V 2A continuous (3A max) \u0026amp; 9V 2A continuous (3A max)\u003c\/li\u003e\n\u003cli\u003eLDO 3.3V: Supports up to 200mA.\u003c\/li\u003e\n\u003cli\u003eVoltage Support: ADC Vbat2 pad supports up to 36V (1K:10K voltage divider).\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 200mA @ 5V with Betaflight, 150mA @ 5V with ArduPilot.\u003c\/li\u003e\n\u003cli\u003eArduPilot: tba\u003c\/li\u003e\n\u003cli\u003eBetaFlight: tba\u003c\/li\u003e\n\u003cli\u003eINAV: tba\u003c\/li\u003e\n\u003cli\u003eTBS Lucid H7 FC\u003c\/li\u003e\n\u003cli\u003eFC-to-ESC cable (plug \u0026amp; play)\u003c\/li\u003e\n\u003cli\u003eDJI O3 cable (plug \u0026amp; play)\u003c\/li\u003e\n\u003cli\u003e4pcs M3 rubber dampers\u003c\/li\u003e\n\u003cli\u003e4pcs M3x8 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x JST-SH1.0 8-pin (Vbat\/G\/Curr\/Rx8\/S1\/S2\/S3\/S4)\u003c\/li\u003e\n\u003cli\u003e1x JST-GH1.25 4-pin (5V\/CAN-H\/CAN-L\/Ground).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":58941402710348,"sku":"FC-LUCIDH7-USA","price":83.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/TBS-Lucid-H7-FC_6bcc5134-8a41-4df3-8a5b-e0c9c62d6599.jpg?v=1790287373","url":"https:\/\/dronepart.co.uk\/products\/tbs-lucid-h7-fc-flight-controller-2-8s-30-30-ndaa-made-in-the-usa","provider":"My Store","version":"1.0","type":"link"}