{"product_id":"tbs-lucid-dronecan-airspeed-sensor-pro","title":"TBS Lucid DroneCAN Airspeed Sensor Pro","description":"\u003cp\u003eThe TBS Lucid DroneCAN Airspeed Sensor PRO is a high-precision airspeed sensor designed for demanding fixed-wing and VTOL platforms where accurate and stable airspeed data is critical. It supports DroneCAN via a CAN JST-GH connector and direct I2C output, and is supplied complete with a stainless steel pitot tube and silicone tubing for immediate installation.\u003c\/p\u003e\n\u003cp\u003eThis PRO version uses the DLVR-L10D pressure sensor, delivering significantly higher accuracy and resolution than standard airspeed sensors. With ±0.30% accuracy and 14-bit output, it provides clean, low-noise airspeed data that is particularly beneficial for TECS, energy management, and advanced autopilot tuning. Firmware is based on ArduPilot AP_Periph and can be updated via the DroneCAN GUI tool.\u003c\/p\u003e\n\u003cp\u003eIf you require a wider maximum airspeed range and a more cost-effective solution, the standard TBS Lucid DroneCAN Airspeed Sensor remains a solid option for general fixed-wing use.\u003c\/p\u003e\n\u003cp\u003eSETUP\u003c\/p\u003e\n\u003cp\u003eDRONECAN MODE\u003c\/p\u003e\n\u003cp\u003eVerify the following parameters are set on your autopilot via your ground station.\u003c\/p\u003e\n\u003cp\u003eCAN_P1_DRIVER = 1 (assuming its on the first CAN bus of the autopilot)\u003c\/p\u003e\n\u003cp\u003eARSPD_TYPE = 8 (DroneCAN)\u003c\/p\u003e\n\u003cp\u003eI2C MODE\u003c\/p\u003e\n\u003cp\u003eARSPD_TYPE = 9 (DLVR-10)\u003c\/p\u003e\n\u003cp\u003eARSPD_USE = 1 to enable using the sensor on autopilots external I2C bus\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCAN \u0026amp; I2C Interface\u003c\/li\u003e\n\u003cli\u003eCAN JST-GH connector, DroneCAN Protocol\u003c\/li\u003e\n\u003cli\u003eI2C JST-GH connector, DLVR-L10D I2C mode\u003c\/li\u003e\n\u003cli\u003eFirmware: ArduPilot AP_Periph TBS-L431-Airspeed  (Update via DroneCAN GUI Tool)\u003c\/li\u003e\n\u003cli\u003eCAN status LED, Orange\u003c\/li\u003e\n\u003cli\u003eFast blinking, No communication between CAN node and Flight Controllers\u003c\/li\u003e\n\u003cli\u003eSlow blinking, Communicating between CAN node and Flight Controllers\u003c\/li\u003e\n\u003cli\u003e3.3V Power LED, Orange\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 4~6V\u003c\/li\u003e\n\u003cli\u003ePower consumption: 60mA\u003c\/li\u003e\n\u003cli\u003eOperating Temperatures: -20°C to 85°C\u003c\/li\u003e\n\u003cli\u003ePressure range: 362psi\/2500kPa\u003c\/li\u003e\n\u003cli\u003eAirspeed range: ±250 km\/h\u003c\/li\u003e\n\u003cli\u003eAccuracy: ±0.30%\u003c\/li\u003e\n\u003cli\u003eOutput Signal Type: 14bit\u003c\/li\u003e\n\u003cli\u003eDimensions: 35mm*22mm*12mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS Lucid DroneCAN Airspeed Sensor Pro\u003c\/li\u003e\n\u003cli\u003e1x Airspeed Sensor Pitot Tube w\/ silicone tube\u003c\/li\u003e\n\u003cli\u003e2x CANBUS cable (4pins 20cm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TBS","offers":[{"title":"Default Title","offer_id":58941401465164,"sku":"FC-A-TBSS-LDCAP","price":79.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/TBS-Lucid-DroneCAN-Airspeed-Sensor-Pro.jpg?v=1790287365","url":"https:\/\/dronepart.co.uk\/products\/tbs-lucid-dronecan-airspeed-sensor-pro","provider":"My Store","version":"1.0","type":"link"}