Dronepart
TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions
TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions
TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions
TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions
TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions

TBS Caipirinha II (V2) FPV Flying Wing – KIT & RTF PNP Versions

£124.90

Introducing the Caipirinha II, the new long range cruiser by Team BlackSheep. With up to 2 hours of flight time, smooth flight and direct control, this FPV wing is in a class of its own. It’s a gentle long range cruiser that turns into a fierce mountain diver with just a slight push on your pitch stick. Dominate the skies, fly in formation with friends, dive all things and bring home footage that blows your mind!

The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.

The PNP kit from TBS is equipped with high quality, digital metal gear servos, a CP2814-1150kV Cobra motor, 50A HobbyWing ESC and high quality Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!

KIT version is barebones wing version with all hardware. No electronics included except for the PDB.

We can confidently say it’s going to be the only long range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope.

Small, lightweight, fly anywhere design

Ultimate in flight stability and endurance

Virtually indestructible EPP/Plywood construction

Pre-cut camera, servo, battery, R/C receiver and video transmitter slots

2x push-to-open equipment bays for R/C and FPV electronics

Pre-cut, sanded and covered ultra-lightweight elevons & pushrods

CAPIRINHA 2 with all hardware accessories

2x Digital MG Servo 6kgf/cm, 5-6V

CP2814-1050kV Cobra Motor

50A HobbyWing Skywalker Wing ESC

Aeronaut 10×6 folding prop with prop assembly (CNC aluminum)

Everything prepared as far as possible. Final assembly time around 2 hours.

CAPIRINHA 2 Hardware – No electronics included except for the PDB.

FPV camera (26x26mm): HS1177

Recording camera: RunCam 3S

Video transmission: 5.8GHz: TBS RaceWing or TBS Unify Pro 2.4GHz: Unify 500mW / 800mW VTx

5.8GHz: TBS RaceWing or TBS Unify Pro

2.4GHz: Unify 500mW / 800mW VTx

2.4GHz Receiver (3-CH or more) / Crossfire Receiver: Nano Rx , Micro Rx , Diversity Rx

Corssfire Transmitter: Full Module , 100mW Module

Battery: 4S 4500mAh – 6600 mAh 20C LiPo

Specifications

In the box