{"product_id":"strobon-se-v2-strobe-light-controller","title":"Strobon SE V2 – Strobe Light Controller","description":"\u003cp\u003eStrobon SE drives any Power LED with 1000mA for 40ms (2 x 20ms pulses) on every second and this generates very bright flashes with very low power consumption (50mAh).\u003c\/p\u003e\n\u003cp\u003eStrobon SE v2 is completely same circuit design with our revolutionary STROBON v2 Navigation Strobes excluding the LED and size. It is a more flexible design than other LED embedded Strobon models. You can choose any Power LED(1W) and install only the LED body outside of your flying platform. It works with any Power LED(3W) and it also drives more than one Power LED (the colours must be the same for same forward voltage).\u003c\/p\u003e\n\u003cp\u003eNow, it’s configurable for 5 different patterns!\u003c\/p\u003e\n\u003cp\u003eStrobe (Legendary Strobon v1 strobe effect. 3 fast flashes like xenon wing tip flashlights)\u003c\/p\u003e\n\u003cp\u003eBlink (Simulates belly or tail lights. Continuous ON\/OFF)\u003c\/p\u003e\n\u003cp\u003eHeartbeat (standard beacon light pattern, ramp up\/ramp down\/off)\u003c\/p\u003e\n\u003cp\u003eRotating Beacon (perfect simulation of rolling beacons. ramp up\/flash\/ramp down\/off)\u003c\/p\u003e\n\u003cp\u003eStatic (you can use it as landing headlights or static wing-tip lights)\u003c\/p\u003e\n\u003cp\u003eIt allows 2 different working modes, RC mode or Standalone.\u003c\/p\u003e\n\u003cp\u003ePower it with directly from battery (4-6v) it works on Standalone mode and strobes continuously.\u003c\/p\u003e\n\u003cp\u003ePlug it on your RC receiver’s any channel for RC mode, then you can On\/Off it over servo channel.\u003c\/p\u003e\n\u003cp\u003eSCHEMATIC for SYNCHRONISED \u0026amp; RC CONTROLLED MODE\u003c\/p\u003e\n\u003cp\u003eSCHEMATIC for STAND ALONE MODE\u003c\/p\u003e\n\u003cp\u003ePATTERN SELECTION\u003c\/p\u003e\n\u003cp\u003eAll you need a piece of wire or a tweezer to change the pattern. Connect two small pads of the Strobon SE v2 board while it’s working (it will not change the pattern when it’s OFF) It will stop working when you connect these pins and jump to next pattern when you release the connection. That’s all.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 3.5 – 6 volt\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption per hour @5V Strobe: average 60mA (1A in event of the flash) Blink: 70mA (150ma ON) Heartbeat: 120mA Rolling Beacon: average  170mA (1A in event of the flash) Static: 140mA\u003c\/li\u003e\n\u003cli\u003eStrobe: average 60mA (1A in event of the flash)\u003c\/li\u003e\n\u003cli\u003eBlink: 70mA (150ma ON)\u003c\/li\u003e\n\u003cli\u003eHeartbeat: 120mA\u003c\/li\u003e\n\u003cli\u003eRolling Beacon: average  170mA (1A in event of the flash)\u003c\/li\u003e\n\u003cli\u003eStatic: 140mA\u003c\/li\u003e\n\u003cli\u003e24.3mm X 9.2mm X 2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.3 gram without wires\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40 to +105 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1x Strobon SE V2 – Strobe Light Controller\u003c\/li\u003e\u003c\/ul\u003e","brand":"Flytron","offers":[{"title":"Default Title","offer_id":58941345661260,"sku":"Led-StrobeCon","price":6.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Strobon-Navigation-Strobe-Controller.jpg?v=1790287118","url":"https:\/\/dronepart.co.uk\/products\/strobon-se-v2-strobe-light-controller","provider":"My Store","version":"1.0","type":"link"}