{"product_id":"speedybee-f405-wing-app-fixed-wing-flight-controller","title":"SpeedyBee F405 WING APP Fixed Wing Flight Controller","description":"\u003cp\u003eExperience the convenience of the SpeedyBee F405 WING APP. This Flight Controller is specially designed for Fixed Wing aircraft and best of all purchasing it won’t break the bank. It’s unquestionably the best value wing FC on the market right now. It is built on the STM32 F405 chipset and 1MB of storage. The flight controller supports up to 11 PWM outputs for motor and servo control and 6 UARTs for connection to accessories like GPS, airspeed sensor etc. There’s 3 high power BECs for powering the FC, VTX and Servo power as well as a wide 7-36V input (2-6S LiPo). This versatile flight controller works with both iNav and Ardupilot, making it suitable for a variety of fixed-wing models. One of the standout features of SpeedyBee controllers is their built-in wireless capability and this controller is no different. It also features built-in wireless capability which allows you to connect the FC to the SpeedyBee App on your smartphone via WiFi or Bluetooth. Other unique features, includes an onboard LiPo battery checker display and four separate LED ports with an inbuilt LED driver.\u003c\/p\u003e\n\u003cp\u003eF405 WING APP The flight controller uses a reliable STM32 F405 chipset and works with both iNav and Ardupilot. This makes the F405 Wing App an excellent choice for a variety of fixed-wing models.\u003c\/p\u003e\n\u003cp\u003eICM-42688-P gyro This FC has a high quality ICM-42688-P gyro on board. The FC also has a built-in barometer (SPL006-001).\u003c\/p\u003e\n\u003cp\u003eWireless configuration Thanks to the built-in WiFi and Bluetooth functionalities, it is possible to connect wirelessly to the flight controller. You can then easily configure the FC via the SpeedyBee and QGroundcontrol apps.\u003c\/p\u003e\n\u003cp\u003eWireless Firmware Flasher With the SpeedyBee F405 WING APP Flight Controller you can easily and wirelessly flash firmware.\u003c\/p\u003e\n\u003cp\u003ePlug and Play This SpeedyBee FC is equipped with plug for connecting a digital VTX, analog VTX, receiver, camera and GPS to make your build in no time. While SpeedyBee have designed this controller to minimise soldering, for those who prefer to, soldering is still possible via pads on the bottom of the board.\u003c\/p\u003e\n\u003cp\u003ePWM outputs Up to 11 PWM outputs are available for controlling the servos and motors.\u003c\/p\u003e\n\u003cp\u003eLiPo checker This FC is equipped with a built-in LiPo checker. It allows you to easily and quickly check the battery status.\u003c\/p\u003e\n\u003cp\u003eVTOL Support This FC supports Vertical Take Off and Landing (VTOL). Ardupilot’s QStabilize, QLoiter and QRTL modes allow vertical takeoff and landing.\u003c\/p\u003e\n\u003cp\u003eIncludes LED strips Fly in style and light up the skies with the LED strips (not included). These are plug and play, so no soldering is required.\u003c\/p\u003e\n\u003cp\u003eSD card slot The Blackbox Flash Memory of this SpeedyBee FC can be expanded as desired via the SD card slot.\u003c\/p\u003e\n\u003cp\u003eDimensions The SpeedyBee F405 V3 FC has dimensions of 15 x 32 x 19 mm. The weight of the FC is 24.5 grams.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Wireless configuration\u003c\/li\u003e\n\u003cli\u003eSupports RGB LED strip\u003c\/li\u003e\n\u003cli\u003eSupports Battery level indicator\u003c\/li\u003e\n\u003cli\u003eCompatible FC Firmware: INAV \/ Ardupilot\u003c\/li\u003e\n\u003cli\u003ePower Input: 2-6S LiPo\u003c\/li\u003e\n\u003cli\u003eDimension: 52（L） x 32（W） x 19（H） mm\u003c\/li\u003e\n\u003cli\u003eWeight: 35g（with USB extender）\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F405,168MHz,1MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU(Gyro\u0026amp;Accelerometer): ICM-42688-P\u003c\/li\u003e\n\u003cli\u003eBarometer: SPL006-001\u003c\/li\u003e\n\u003cli\u003eOSD Chip: AT7456E\u003c\/li\u003e\n\u003cli\u003eBlackbox: MicroSD Card Slot\u003c\/li\u003e\n\u003cli\u003eExpressLRS (ELRS) and Crossfire (CRSF) Receivers Supported (UART1)\u003c\/li\u003e\n\u003cli\u003eBuilt in inverter for SBUS input (UART2-RX pad)\u003c\/li\u003e\n\u003cli\u003eRSSI Supported (RS pad)\u003c\/li\u003e\n\u003cli\u003eSupported FC Firmware INAV FC target:SpeedyBeeF405WING (default) ArduPilot FC target: SpeedyBeeF405WING\u003c\/li\u003e\n\u003cli\u003eINAV FC target:SpeedyBeeF405WING (default)\u003c\/li\u003e\n\u003cli\u003eArduPilot FC target: SpeedyBeeF405WING\u003c\/li\u003e\n\u003cli\u003eInput voltage range 7~36V (2~6S LiPo)\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Sensor Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)\u003c\/li\u003e\n\u003cli\u003eBattery Current Sensor 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A\/V in ArduPilot)\u003c\/li\u003e\n\u003cli\u003eTVS Protective diode Yes\u003c\/li\u003e\n\u003cli\u003eFC BEC output Output 5.2V +\/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip\u003c\/li\u003e\n\u003cli\u003eVTX BEC output Output 9V +\/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.\u003c\/li\u003e\n\u003cli\u003eServo BEC output Output 4.9V +\/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.\u003c\/li\u003e\n\u003cli\u003eWireless Configuration (long press BOOT button for 6 seconds to switch modes) BLE mode, connect to Speedybee APP Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.\u003c\/li\u003e\n\u003cli\u003eClassic Bluetooth SPP mode, connect to QGroundControl APP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6x UART’s\u003c\/li\u003e\n\u003cli\u003e1x I2C for magnetometer, digital airspeed sensor\u003c\/li\u003e\n\u003cli\u003e4x ADC for VBAT, Current, RSSI, Analog AirSpeed Sensor\u003c\/li\u003e\n\u003cli\u003e12x PWM 12x (11 PWM output + 1 LED pad)\u003c\/li\u003e\n\u003cli\u003e3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red) 1x RGB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Speedybee","offers":[{"title":"Default Title","offer_id":58941335142732,"sku":"WFC-SBF405","price":39.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/SpeedyBee-F405-WING.jpg?v=1790287081","url":"https:\/\/dronepart.co.uk\/products\/speedybee-f405-wing-app-fixed-wing-flight-controller","provider":"My Store","version":"1.0","type":"link"}