{"product_id":"speedybee-f405-mini-bls-flight-controller-stack-with-35a-v2-esc","title":"SpeedyBee F405 Mini BLS Flight Controller \/ Stack with 35A V2 ESC","description":"\u003cp\u003eOur stock of the stack is now with the V2 edition of the 35A ESC.\u003c\/p\u003e\n\u003cp\u003eThis is the mini version of SpeedyBee’s F405 30×30 stack , suited to 2-4inch quads and even lightweight 5-inch drones.\u003c\/p\u003e\n\u003cp\u003eThe spec of the FC is impressive for a mini FC at such a great price point. It uses an upgraded F405 flight controller chip with better performance than the F411. It also has the ICM42688P gyro, 4 available UART ports, onboard 8MB blackbox, built-in barometer, OSD and a 4-level battery voltage display. There’s two independent voltage regulators, a 9V 3A output and 5V 2A output, making it compatible with all DJI FPV air units and standard analog FPV.\u003c\/p\u003e\n\u003cp\u003eLike their other flight controllers, this one works with their fantastic SpeedyBee App ( iOS App Store \/ Google Play ); allowing you to configure your newly built quad, fine-tune PID’s, and configure other parameters without a laptop, simply via your phone or tablet wirelessly.\u003c\/p\u003e\n\u003cp\u003eThe FC is compatible with a standard 20×20 mounting pattern, using either M2 or M3 fixings, which are included. Considering the board’s small size, the size of the solder pads is generous and well labelled making for an easier installation.\u003c\/p\u003e\n\u003cp\u003eIn stack form, it comes with a 4-in-1 ESC that provides four synchronized outputs with a continuous current of 35A and burst of 45A. It suits 3-6S input. It also has a current sensor allowing you to monitor power use. Equipped with a TVS transient suppression diode onboard, it can better absorb the voltage spike when you plug in the battery, or during crashes that block your props. The ESC operates BLHeli_S firmware and via the SpeedyBee App you can even configure the ESC settings wirelessly as well.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with both M2 and M3 installation hole sizes.\u003c\/li\u003e\n\u003cli\u003eSupports all FPV systems: DJI, HDZero, Walksnail and analog\u003c\/li\u003e\n\u003cli\u003eBattery level indication LEDs.\u003c\/li\u003e\n\u003cli\u003e4x UART’s.\u003c\/li\u003e\n\u003cli\u003eOnboard 5V 2A and 9V 3A BEC.\u003c\/li\u003e\n\u003cli\u003eOnboard barometer for real-time altitude sensing\u003c\/li\u003e\n\u003cli\u003e8MB memory for Blackbox.\u003c\/li\u003e\n\u003cli\u003eOnboard Tantalum capacitors for noise filtration.\u003c\/li\u003e\n\u003cli\u003eOnboard TVS diode on the ESC for added protection.\u003c\/li\u003e\n\u003cli\u003eUSB-C connector.\u003c\/li\u003e\n\u003cli\u003eSDA\/SCL connection available.\u003c\/li\u003e\n\u003cli\u003ePower your GPS with a USB cable – no battery needed. No extra heat, no worries.\u003c\/li\u003e\n\u003cli\u003e35A BLHeli_S 4in1 ESC, compatible with Bluejay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlight Controller: SpeedyBee F405 Min\u003c\/li\u003e\n\u003cli\u003eESC: SpeedyBee BLS 35A Mini V2 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003eBluetooth: Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available.\u003c\/li\u003e\n\u003cli\u003eWiFi: NOT Supported\u003c\/li\u003e\n\u003cli\u003eWireless FC Firmware Flashing: NOT Supported\u003c\/li\u003e\n\u003cli\u003eWireless Blackbox Download \u0026amp; Analysis: NOT Supported\u003c\/li\u003e\n\u003cli\u003ePower Input: 3-6S LiPo\u003c\/li\u003e\n\u003cli\u003eMounting: 20 x 20mm 3.5mm hole size，Compatible with M2 and M3 screws\/Silicone grommets\u003c\/li\u003e\n\u003cli\u003eDimension: 32mm(L) x 35mm(W) x 14.2mm(H)\u003c\/li\u003e\n\u003cli\u003eWeight: 13.5g\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F405\u003c\/li\u003e\n\u003cli\u003eIMU(Gyro): ICM42688P\u003c\/li\u003e\n\u003cli\u003eUSB Port Type: Type-C\u003c\/li\u003e\n\u003cli\u003eBarometer: Built-in\u003c\/li\u003e\n\u003cli\u003eOSD Chip: AT7456E chip\u003c\/li\u003e\n\u003cli\u003eBLE Bluetooth: Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available.\u003c\/li\u003e\n\u003cli\u003eWireless FC Firmware Flashing: NOT Supported. Please connect to the Betaflight configurator on the PC to do FC firmeare update\u003c\/li\u003e\n\u003cli\u003eWireless Blackbox Dwonload \u0026amp; Analysis: NOT Supported. Please connect to the Betaflight configurator on the PC to do blackbox analysis.\u003c\/li\u003e\n\u003cli\u003eWIFI: Not supported\u003c\/li\u003e\n\u003cli\u003eDJI Air Unit Connection Way: Direct soldering\u003c\/li\u003e\n\u003cli\u003eDJI Air Unit Compatibility: Compatible with all DJI Air Units: DJI O3\/RunCam Link\/Caddx Vista\/DJI Air Unit V1. Please use the solder pads on the front right corner of the flight controller to make a pin-to-pin connection with the solder pads on the DJI Air Unit. UART1(T1, R1) is used for OSD and SUBS(R2) is used for DJI Air Unit’s internal SBUS receiver signal input.\u003c\/li\u003e\n\u003cli\u003eBlackbox: 8MB Onboard Flash\u003c\/li\u003e\n\u003cli\u003eBetaFlight Camera Control Pad: Yes(CC pad on the front side)\u003c\/li\u003e\n\u003cli\u003eCurrent Sensor Input: Supported. For SpeedyBee BLS 35A V2 ESC, please set Scale=250 and Offset=-500.\u003c\/li\u003e\n\u003cli\u003ePower Input: 3-6S LiPo. The flight controller is powered through the G, V wires of the 8pin harn\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Speedybee","offers":[{"title":"Flight Stack: FC + 35A ESC","offer_id":58941333897548,"sku":"FC-SB-F4MINSTACK","price":63.99,"currency_code":"GBP","in_stock":false},{"title":"Flight Controller","offer_id":58941333930316,"sku":"FC-SB-F4MIN","price":35.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/SB-F4MINI-STACK.jpg?v=1790287078","url":"https:\/\/dronepart.co.uk\/products\/speedybee-f405-mini-bls-flight-controller-stack-with-35a-v2-esc","provider":"My Store","version":"1.0","type":"link"}