{"product_id":"pixhawk-flight-controller-autopilot-kit","title":"Pixhawk Flight Controller Autopilot Kit","description":"\u003cp\u003eThere are lots of Pixhawk named flight controllers, but this is the original. It’s still a capable FC and great for new users as there is so much info and guidance online about its setup. Not to mention lots of accessories for it to expand its capability.\u003c\/p\u003e\n\u003cp\u003eThe 433 Telemetry Kit in bundle 3 has been upgraded to the 100mW Holybro Telemetry Kit\u003c\/p\u003e\n\u003cp\u003eWe are currently selling the Pixhawk 2.4.8 – it looks like this:\u003c\/p\u003e\n\u003cp\u003eThe Pixhawk FC has become recognised as one of the most advanced, low-cost autopilot systems available. It is a brilliant piece of kit that can turn any fixed-wing aircraft, rotary-wing, multirotor or even boats and cars into a fully autonomous vehicle; capable of performing a wide range of tasks, even pre-programmed GPS missions with waypoints. The list of what this flight controller is capable of has quickly been surpassed by what it cannot, with an ever expanding set of features, flight modes, and supported platforms. Furthermore, the Pixhawk project is supported by a number of development communities making it one of the most flexible and reliable platforms for vehicle control.\u003c\/p\u003e\n\u003cp\u003ePixhawk is an open-hardware project and as such there are many versions of the Pixhawk FC available. The version of the Pixhawk being sold here is based on the original 3DR Version 1 FMUv2 Autopilot design. 3DR no longer make the FC, but as it’s based open source hardware design and runs open-source firmware we’ve had the Pixhawk manufactured ourselves to the same specification, with a couple of tweaks to improved reliability further.\u003c\/p\u003e\n\u003cp\u003ePixhawk Wiring Quickstart Guide\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS (68 MHz \/ 252 MIPS Cortex-M4F)\u003c\/li\u003e\n\u003cli\u003e14 PWM\/servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)\u003c\/li\u003e\n\u003cli\u003eAbundant connectivity options for additional peripherals (UART, I2C, CAN)\u003c\/li\u003e\n\u003cli\u003eIntegrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply\u003c\/li\u003e\n\u003cli\u003eBackup system integrates mixing, providing consistent autopilot and manual override mixing modes\u003c\/li\u003e\n\u003cli\u003eRedundant power supply inputs and automatic failover\u003c\/li\u003e\n\u003cli\u003eExternal safety button for easy motor activation\u003c\/li\u003e\n\u003cli\u003eMulticolor LED indicator\u003c\/li\u003e\n\u003cli\u003eHigh-power, multi-tone piezo audio indicator\u003c\/li\u003e\n\u003cli\u003eMicroSD card for long-time high-rate logging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAccessories:\u003c\/p\u003e\n\u003cp\u003eGPS\/Compass Module : A GPS \/ Compass Module allows you to unlock the full potential of your Pixhawk FC, facilitating autonomous flight functions and providing positional telemetry data.\u003c\/p\u003e\n\u003cp\u003eTelemetry Kit : The Telemetry Radio Kit allows you to easily add a two-way telemetry connection between your autopilot and ground station wirelessly, providing unparalleled ease of use for viewing in-flight data, changing missions on the fly, and tuning.\u003c\/p\u003e\n\u003cp\u003eI2C Splitter : The I2C splitter is used to expand the Pixhawk’s I2C port. It can be used to connect additional modules for example an airspeed sensor, magnetometer and external LED.\u003c\/p\u003e\n\u003cp\u003ePower Module \/ HV Power Module : The Power Module (PM) for the Pixhawk provides a plug and play solution for powering your flight controller with clean power from a LiPo battery, as well as reporting battery voltage and current consumption for logging and live telemetry.\u003c\/p\u003e\n\u003cp\u003ePWM to PPM Encoder : The Pixhawk doesn’t support traditional PWM RC receivers so this device can be used to convert from individual PWM channels to a single PPM input.\u003c\/p\u003e\n\u003cp\u003eUSB \/ Status LED Module : This module includes a status LED which can be used to indicate arming \/ battery status. It also features a USB connection that makes it easy to connect to the Pixhawk for programming.\u003c\/p\u003e\n\u003cp\u003eMicro OSD : The Micro OSD (On-Screen-Display) adds a telemetry overlay to your FPV, so you can view status information such as flight mode, altitude, speed, heading and lots more in real-time on your video feed.\u003c\/p\u003e\n\u003cp\u003eOptical Flow Smart Camera Kit : This unit combines a special camera \u0026amp; sonar sensor to provide the Pixhawk FC with the ability to position lock when no GPS signal is available, for example indoors. It can also be used in conjunction with the GPS data to provide a more accurate position lock. The sonar sensor can be used to provide a terrain tracking capability.\u003c\/p\u003e\n\u003cp\u003eDigital Airspeed sensor : A perfect match for our Pixhawk Flight Controller, giving you telemetry feedback and a more accurate way for the flight controller to determine airspeed, over just relying on GPS calculated ground speed.\u003c\/p\u003e\n\u003cp\u003eLigthweight Micro USB Extension Wire\u003c\/p\u003e\n\u003cp\u003ePixhawk Bundles:\u003c\/p\u003e\n\u003cp\u003ePixhawk 1 FC\u003c\/p\u003e\n\u003cp\u003e4GB SD Card\u003c\/p\u003e\n\u003cp\u003eBuzzer\u003c\/p\u003e\n\u003cp\u003eSafety Switch\u003c\/p\u003e\n\u003cp\u003eI2C Splitter\u003c\/p\u003e\n\u003cp\u003ePower module\u003c\/p\u003e\n\u003cp\u003eM8N GPS\u003c\/p\u003e\n\u003cp\u003eGPS Holder\u003c\/p\u003e\n\u003cp\u003ePWM to PPM Converter\u003c\/p\u003e\n\u003cp\u003eRGB Status LED\u003c\/p\u003e\n\u003cp\u003eMicro OSD\u003c\/p\u003e\n\u003cp\u003e433 Telemetry Kit\u003c\/p\u003e\n\u003cp\u003eDF13 4\/5\/6 Pin Cable\u003c\/p\u003e\n\u003cp\u003eWhat can the APM Board Control?\u003c\/p\u003e\n\u003cp\u003eMultirotors – APM: Copter\u003c\/p\u003e\n\u003cp\u003ePlanes – APM:Plane\u003c\/p\u003e\n\u003cp\u003eHelicopters – APM: Copter\u003c\/p\u003e\n\u003cp\u003eRovers – APM: Rover\u003c\/p\u003e\n\u003cp\u003eResources:\u003c\/p\u003e\n\u003cp\u003ePixhawk Wiki\u003c\/p\u003e\n\u003cp\u003eFREE Ground Control Stations \/ Software\u003c\/p\u003e\n\u003cp\u003eMission Planner\u003c\/p\u003e\n\u003cp\u003eQGroundControl\u003c\/p\u003e\n\u003cp\u003eQGroundControl Software Interface\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32 bit STM32F427 Cortex M4 core with FPU (Rev3)\u003c\/li\u003e\n\u003cli\u003e168 MHz\/256 KB RAM\/2 MB Flash\u003c\/li\u003e\n\u003cli\u003e32 bit STM32F103 failsafe co-processor\u003c\/li\u003e\n\u003cli\u003eST Micro L3GD20H 16 bit gyroscope\u003c\/li\u003e\n\u003cli\u003eST Micro LSM303D 14 bit accelerometer \/ magnetometer\u003c\/li\u003e\n\u003cli\u003eInvensense MPU 6000 3-axis accelerometer \/ gyroscope\u003c\/li\u003e\n\u003cli\u003eMEAS MS5611 barometer\u003c\/li\u003e\n\u003cli\u003eSpektrum DSM \/ DSM2 \/ DSM-X® Satellite compatible input\u003c\/li\u003e\n\u003cli\u003eFutaba S.BUS® compatible input and output\u003c\/li\u003e\n\u003cli\u003ePPM sum signal\u003c\/li\u003e\n\u003cli\u003eRSSI (PWM or voltage) input\u003c\/li\u003e\n\u003cli\u003eI2C®\u003c\/li\u003e\n\u003cli\u003eSPI\u003c\/li\u003e\n\u003cli\u003e3.3 and 6.6V ADC inputs\u003c\/li\u003e\n\u003cli\u003eExternal microUSB port\u003c\/li\u003e\n\u003cli\u003eIdeal diode controller with automatic failover\u003c\/li\u003e\n\u003cli\u003eServo rail high-power (7 V) and high-current ready\u003c\/li\u003e\n\u003cli\u003eAll peripheral outputs over-current protected, all inputs ESD protected\u003c\/li\u003e\n\u003cli\u003eWeight: 38g\u003c\/li\u003e\n\u003cli\u003eSize: 81.5x50x15.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5x UART (serial ports), one high-power capable, 2x with HW flow control\u003c\/li\u003e\n\u003cli\u003e2x CAN\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seriously Pro","offers":[{"title":"Bundle 1","offer_id":58941215342924,"sku":"FC-PXH-1","price":149.99,"currency_code":"GBP","in_stock":true},{"title":"Bundle 2","offer_id":58941215375692,"sku":"FC-PXH-2","price":199.9,"currency_code":"GBP","in_stock":true},{"title":"Bundle 3","offer_id":58941215408460,"sku":"FC-PXH-3","price":299.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Pixhawk-FC.jpg?v=1790286555","url":"https:\/\/dronepart.co.uk\/products\/pixhawk-flight-controller-autopilot-kit","provider":"My Store","version":"1.0","type":"link"}