{"product_id":"newbeedrone-beeid-pro-m10-gps-module-with-remoteid-ist8310-compass","title":"NewBeeDrone BeeID Pro M10 GPS Module with RemoteID \u0026 IST8310 Compass","description":"\u003cp\u003eNavigation, Remote ID \u0026amp; Compass Integration in One Compact Module\u003c\/p\u003e\n\u003cp\u003eThe NewBeeDrone BeeID Pro M10 GPS Module is an advanced navigation and Remote ID solution designed for larger FPV drones, autonomous aircraft, and professional flight controller setups. Building on the original BeeID platform, the Pro version adds a high-precision IST8310 compass, a more robust GH1.25 connector system, and improved compatibility with PX4 and ArduPilot-based builds.\u003c\/p\u003e\n\u003cp\u003eAt the core is a modern u-blox M10 GNSS receiver, supporting simultaneous reception from multiple satellite systems for fast satellite acquisition and reliable positioning accuracy. Combined with the integrated IST8310 magnetometer, the BeeID Pro delivers precise heading and location data essential for advanced autonomous functions including waypoint missions, Return-to-Home, loitering, and GPS-assisted flight modes.\u003c\/p\u003e\n\u003cp\u003eLike the original BeeID, the Pro version includes built-in FAA-compliant Remote ID broadcasting over Bluetooth and WiFi. It continuously transmits required telemetry including drone position, altitude, speed, and serial identification without the need for an external module. A dedicated onboard barometer is included specifically for Remote ID altitude data.\u003c\/p\u003e\n\u003cp\u003eDespite its expanded feature set, the BeeID Pro remains compact and installation-friendly. It uses an industry-standard GH1.25 6-pin connector for clean integration with professional flight controllers, while still retaining direct solder pads underneath for custom DIY installations.\u003c\/p\u003e\n\u003cp\u003eIdeal for PX4, ArduPilot, iNav, and advanced Betaflight GPS builds, the BeeID Pro combines navigation accuracy, Remote ID compliance, and compass functionality into a single compact module.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eu-blox M10 multi-GNSS GPS receiver\u003c\/li\u003e\n\u003cli\u003eIntegrated IST8310 compass (magnetometer)\u003c\/li\u003e\n\u003cli\u003eBuilt-in FAA-compliant Remote ID broadcasting\u003c\/li\u003e\n\u003cli\u003eBluetooth and WiFi Remote ID transmission\u003c\/li\u003e\n\u003cli\u003eDedicated onboard barometer for Remote ID altitude data\u003c\/li\u003e\n\u003cli\u003eDesigned for PX4, ArduPilot, iNav, and Betaflight\u003c\/li\u003e\n\u003cli\u003eGH1.25 6-pin connector for reliable installation\u003c\/li\u003e\n\u003cli\u003eDirect solder pads available for custom builds\u003c\/li\u003e\n\u003cli\u003eCompact all-in-one GPS, compass, and Remote ID solution\u003c\/li\u003e\n\u003cli\u003eRemote ID Built In — When You Need It\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlying drones in FAA-regulated airspace? The BeeID Pro includes fully compliant Remote ID broadcast functionality built directly into the module. It operates seamlessly in the background while the GPS and compass continue handling navigation, positioning, and autonomous flight functions.\u003c\/p\u003e\n\u003cp\u003eDownloads:\u003c\/p\u003e\n\u003cp\u003eBeeID_PRO 3D PRINT Mount Step File: Link\u003c\/p\u003e\n\u003cp\u003eBeeID_PRO Firmware: Link\u003c\/p\u003e\n\u003cp\u003eBeeID Bluetooth Setup Instructions\u003c\/p\u003e\n\u003cp\u003eStep 1: Verify Flight Controller Compatibility\u003c\/p\u003e\n\u003cp\u003eBefore installation, ensure that your flight controller (FC) and its firmware support the UBLOX GPS protocol .\u003c\/p\u003e\n\u003cp\u003e• Some older versions of Betaflight firmware may not be compatible with UBLOX GPS.\u003c\/p\u003e\n\u003cp\u003e• It is recommended to update your FC to the latest firmware to ensure proper functionality.\u003c\/p\u003e\n\u003cp\u003eStep 2: Wiring the BeeID M10Q GPS Module\u003c\/p\u003e\n\u003cp\u003eProper wiring is essential for accurate data transmission between the BeeID module and your flight controller. Follow these steps:\u003c\/p\u003e\n\u003cp\u003e• Connect the BeeID TX (Transmit) pin to the FC RX (Receive) pin on the same UART port.\u003c\/p\u003e\n\u003cp\u003e• Connect the BeeID RX (Receive) pin to the FC TX (Transmit) pin on the same UART port.\u003c\/p\u003e\n\u003cp\u003e• Ensure 5V power and ground are correctly connected to provide stable operation.\u003c\/p\u003e\n\u003cp\u003eStep 3: Configuring the UART Port\u003c\/p\u003e\n\u003cp\u003eAfter wiring, configure the corresponding UART port in your flight controller firmware:\u003c\/p\u003e\n\u003cp\u003e• Set the baud rate to 115200bps to match the module’s default speed.\u003c\/p\u003e\n\u003cp\u003e• Enable GPS mode on the selected UART port.\u003c\/p\u003e\n\u003cp\u003e• Save and reboot your flight controller to apply the changes.\u003c\/p\u003e\n\u003cp\u003eStep 4: Confirm GPS Functionality\u003c\/p\u003e\n\u003cp\u003e• Verify that the module successfully acquires GPS satellites.\u003c\/p\u003e\n\u003cp\u003e• In Betaflight, iNAV, or Ardupilot, check the GPS status page for satellite lock and position updates.\u003c\/p\u003e\n\u003cp\u003e• Ensure that RemoteID broadcasting is active and functional via BLE. You can use the Drone Scanner App to check the broadcasting information.\u003c\/p\u003e\n\u003cp\u003e⚠️ IMPORTANT for iNAV Users Please disable the AUTO-CONFIG setting in iNAV to ensure proper functionality of the BeeID module.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGPS Module: U-blox M10\u003c\/li\u003e\n\u003cli\u003eCompass (Magnetometer): IST8310\u003c\/li\u003e\n\u003cli\u003eSize : 25×31.22×9.5\u003c\/li\u003e\n\u003cli\u003eWeight: About 13.37g\u003c\/li\u003e\n\u003cli\u003eRemote ID: Supported (WiFi \/ Bluetooth broadcast, FAA Compliant)\u003c\/li\u003e\n\u003cli\u003eBarometer: Built-in Broadcast Barometer (dedicated to Remote ID altitude data)\u003c\/li\u003e\n\u003cli\u003eConnector Type: GH1.25 6-Pin (Direct solder pads also available on the bottom)\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 5V\u003c\/li\u003e\n\u003cli\u003ePinout Definition: TX (Connect to FC RX) RX (Connect to FC TX) GND (Ground) 5V (Power) SCL (I2C Clock – for Compass) SDA (I2C Data – for Compass)\u003c\/li\u003e\n\u003cli\u003eTX (Connect to FC RX)\u003c\/li\u003e\n\u003cli\u003eRX (Connect to FC TX)\u003c\/li\u003e\n\u003cli\u003eGND (Ground)\u003c\/li\u003e\n\u003cli\u003e5V (Power)\u003c\/li\u003e\n\u003cli\u003eSCL (I2C Clock – for Compass)\u003c\/li\u003e\n\u003cli\u003eSDA (I2C Data – for Compass)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x NewBeeDrone BeeID Pro M10 GPS Module with RemoteID\u003c\/li\u003e\n\u003cli\u003e2x GH1.25 6-Pin Silicone Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NewBeeDrone","offers":[{"title":"Default Title","offer_id":58941196960076,"sku":"FC-GPS-NBD-BEEIDPRO","price":59.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Remote-ID-Module-with-Copmpass.jpg?v=1790286488","url":"https:\/\/dronepart.co.uk\/products\/newbeedrone-beeid-pro-m10-gps-module-with-remoteid-ist8310-compass","provider":"My Store","version":"1.0","type":"link"}