{"product_id":"micro-minimosd-on-screen-display-for-naze32-cc3d-with-multiwii-osd-kv-team-mod","title":"Micro MinimOSD On Screen Display for Naze32 \u0026 CC3D with MultiWii OSD \u0026 KV Team Mod","description":"\u003cp\u003eThe Micro MinimOSD has been designed with racing drones in mind, it weighs less than 1g and is absolutely tiny. Measuring 15mm x 15mm, it’s about a 1\/3 of the size of the older MinimOSD and yet packs all of its features bar the Dc\/Dc converter. The OSD coupled with the MWOSD firmware boasts a lot of features. If you have the appropriate sensors, it lets you display all of the usual telemetry data like height, speed and position with a virtual horizon, but it also allows you to display a callsign and even tune PID settings via the OSD menu (available on MultiWii firmwares like Cleanflight). It has two voltage inputs, so it can be used to monitor both a flight battery and an auxiliary battery. Lastly there is a pin for analog\/digital PWM RSSI and a connection where you can attach a current sensor. The OSD can be flashed with firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight \/ Cleanflight control boards.\u003c\/p\u003e\n\u003cp\u003eATmega328P with Arduino bootloader\u003c\/p\u003e\n\u003cp\u003eMAX7456 monochrome on-screen display\u003c\/p\u003e\n\u003cp\u003eFTDI compatible pinout\u003c\/p\u003e\n\u003cp\u003eStandard 6-pin ISP header\u003c\/p\u003e\n\u003cp\u003eNO DC\/DC converter. Power board via 5V DC (500mA).\u003c\/p\u003e\n\u003cp\u003eTwo LED indicators\u003c\/p\u003e\n\u003cp\u003eAllows for direct connection of two batteries (up to 4S)\u003c\/p\u003e\n\u003cp\u003ePad for an Analog or Digital PWM RSSI signal\u003c\/p\u003e\n\u003cp\u003ePad for the connection of a Current Sensor\u003c\/p\u003e\n\u003cp\u003eThis Board can be used as a normal OSD for APM or it can be used with MWC KV Team Mod.\u003c\/p\u003e\n\u003cp\u003eMAVlink Compatible\u003c\/p\u003e\n\u003cp\u003eFirmware flashing (requires a FTDI Programmer ):\u003c\/p\u003e\n\u003cp\u003eMWOSD Download : Open Source OSD for MultiWii, Baseflight, Cleanfight\u003c\/p\u003e\n\u003cp\u003eArduino IDE : Required to flash the MinimOSD with the MWOSD Firmware\u003c\/p\u003e\n\u003cp\u003eDownload the OSD firmware MW OSD and the Arduino Software .\u003c\/p\u003e\n\u003cp\u003eConnect the OSD to the FTDI adapter observing the pinout diagram , and that to the PC.\u003c\/p\u003e\n\u003cp\u003eStart Arduino IDE.\u003c\/p\u003e\n\u003cp\u003eSelect File – Open. Browse to the MW_OSD folder and select ‘MW_OSD.ino’\u003c\/p\u003e\n\u003cp\u003eThe MW OSD Firmware needs to be configured so that it knows you are using the Mirco MinimOSD. Click on the tab “ config.h ” and uncomment #define WITESPYV1 – this option tells the firmware you are using the MircoMinim OSD Hardware. If you are running Cleanflight, also uncomment #define CLEANFLIGHT ( Settings Screenshot or File download MW_OSD.zip for example). Remember to recomment (add \/\/) the options you are not using.\u003c\/p\u003e\n\u003cp\u003eBefore flashing the firmware, be sure your Arduino IDE has as selected board. Go to menu Tools – Board – Arduino Pro or Pro Mini 5V, 16MHz, w\/ ATmega328. Also select the proper serial port in menu Tools – Serial Port.\u003c\/p\u003e\n\u003cp\u003eCompile and Upload sketch by clicking on the “Upload” button.\u003c\/p\u003e\n\u003cp\u003eTo configure the OSD, use the MWOSD gui which you find in the MWOSD package. MWOSD GUI PLEASE NOTE: The OSD does not come with the header pins pre-soldered. It also needs to be flashed with the MWOSD firmware to work with the Naze32\/Flip flight controllers.\u003c\/p\u003e\n\u003cp\u003eMWOSD GUI\u003c\/p\u003e\n\u003cp\u003ePLEASE NOTE: The OSD does not come with the header pins pre-soldered. It also needs to be flashed with the MWOSD firmware to work with the Naze32\/Flip flight controllers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328P with Arduino bootloader\u003c\/li\u003e\n\u003cli\u003eSize: 15x15mm\u003c\/li\u003e\n\u003cli\u003eWeight:\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seriously Pro","offers":[{"title":"Default Title","offer_id":58941176152396,"sku":"OSD-MICRMIN","price":12.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Naze32-OSD.jpg?v=1790286414","url":"https:\/\/dronepart.co.uk\/products\/micro-minimosd-on-screen-display-for-naze32-cc3d-with-multiwii-osd-kv-team-mod","provider":"My Store","version":"1.0","type":"link"}