{"product_id":"matek-h743-slim-v4-30-30-flight-controller","title":"Matek H743 Slim V4 30×30 Flight Controller","description":"\u003cp\u003eFLIGHT CONTROLLER H743-SLIM V4\u003c\/p\u003e\n\u003cp\u003eSTM32H743VIH6, Dual ICM42688P, DPS368, OSD, 7x UARTs, 2x I2C, 1x CAN, 13x PWM outputs, 5V BEC\u003c\/p\u003e\n\u003cp\u003eLoaded with an array of features and plenty of room for peripherals, the Matek H743-SLIM V4 is designed for demanding FPV, long-range, and autonomous builds. It’s compatible with INAV, Betaflight, and ArduPilot, and offers significantly more processing headroom than F4-based flight controllers.\u003c\/p\u003e\n\u003cp\u003eCompared to the previous V3 version, the H743-SLIM V4 introduces several hardware upgrades while keeping the same board layout and pinout. The 5V BEC output has been increased from 2A to 2.5A , the filtered 5V \/ VBAT output has been increased from 1A to 2A , TVS protection has been added to the main battery input, and additional MCU I\/O protection has been implemented. The barometer has also been upgraded from the DPS310 to the more environmentally resistant DPS368 .\u003c\/p\u003e\n\u003cp\u003eAlongside its ultra-fast H7 480MHz processor, the specification includes dual ICM42688P IMUs for clean and stable gyro data, a built-in AT7456E OSD , 13 PWM outputs , 7 UARTs with inversion , 2x I2C , 1x CAN , switchable dual camera inputs , and a MicroSD card slot for Blackbox logging. DJI FPV OSD is supported via any spare UART.\u003c\/p\u003e\n\u003cp\u003eCurrent version is V4.\u003c\/p\u003e\n\u003cp\u003eVersions:\u003c\/p\u003e\n\u003cp\u003eV1, IMU MPU6000, ICM20602\u003c\/p\u003e\n\u003cp\u003eV1.5, IMU MPU6000, ICM42605\u003c\/p\u003e\n\u003cp\u003eV3, IMU ICM42688P, ICM42605\u003c\/p\u003e\n\u003cp\u003eV4 – IMU: Dual ICM42688P, DPS368 barometer, upgraded power and protection\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eMCU STM32H743VIH6, 480MHz, 1MB RAM, 2MB Flash IMU Dual ICM42688P (SPI1 \u0026amp; SPI4) Barometer Infineon DPS368 (improved environmental resistance) OSD AT7456E (SPI2) Blackbox MicroSD card socket (SDIO) UARTs 7x UARTs (1, 2, 3, 4, 6, 7, 8) with built-in inversion PWM Outputs 13x PWM outputs (including “LED” pad) I2C 2x I2C CAN 1x CAN ADC Inputs 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) LED Indicators 3x LEDs for FC status (Blue, Red) and 3.3V indicator (Red) SPI 1x SPI3 breakout USB USB Type-C (USB 2.0) Connectors 1x JST-SH1.0 8-pin connector (VBAT \/ G \/ Curr \/ RX8 \/ S1 \/ S2 \/ S3 \/ S4) 1x JST-GH1.25 4-pin connector (5V \/ CAN-H \/ CAN-L \/ G) Video \u0026amp; Peripherals Dual analog camera inputs with onboard switching DJI FPV OSD supported via any spare UART Power VBAT Input 6–36V (2–8S LiPo) BEC 5V 2.5A continuous Filtered Output Switchable 5V or VBAT output, up to 2A (for camera \/ VTX) 3.3V LDO Max 200mA Current Sensor No current sensor built-in Voltage Monitoring Vbat2 pad supports up to 69V (voltage divider 1K:20K) Static Power Consumption ~200mA @ 5V with Betaflight ~150mA @ 5V with ArduPilot Firmware Support ArduPilot (ChibiOS): MATEKH743 Betaflight: MATEKH743 INAV: MATEKH743 Physical Mounting: 30.5 × 30.5mm, Φ4mm (Φ3mm with grommets) Dimensions: 36 × 36 × 5mm Weight: 7g Included 1 × H743-SLIM V4 flight controller 6 × Silicon grommets (M4 to M3) 1 × JST-SH1.0 8-pin cable (5cm) 2 × JST-SH1.0 8-pin connectors 1 × JST-GH-4P to JST-GH-4P CAN cable (20cm)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":58941162848588,"sku":"FC-H743-SLIMV4","price":84.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Matek-FLIGHT-CONTROLLER-H743-SLIM-V4.jpg?v=1790286366","url":"https:\/\/dronepart.co.uk\/products\/matek-h743-slim-v4-30-30-flight-controller","provider":"My Store","version":"1.0","type":"link"}