{"product_id":"matek-f405-wing-v2-fixed-wing-inav-flight-controller-pdb","title":"Matek F405-WING V2 Fixed Wing iNAV Flight Controller \/ PDB","description":"\u003cp\u003eFLIGHT CONTROLLER F405-WING V2\u003c\/p\u003e\n\u003cp\u003eSTM32F405RGT6, ICM42688P, DPS310, OSD, 6x UARTs, 10x PWM, 2x I2C, 3x BEC\u003c\/p\u003e\n\u003cp\u003eThe Matek F405 was the fight controller that started the iNav Wing FC revolution and now it’s back and upgraded!\u003c\/p\u003e\n\u003cp\u003eDifferences from V1:\u003c\/p\u003e\n\u003cp\u003eNew Layout\u003c\/p\u003e\n\u003cp\u003eUSB: Type C (Micro USB V1)\u003c\/p\u003e\n\u003cp\u003eIMU: ICM42688P (MPU6000 V1)\u003c\/p\u003e\n\u003cp\u003eBARO: DPS310 (BMO280 V1)\u003c\/p\u003e\n\u003cp\u003eCurrent Sensor: 100A Continuous \/ 220A Peak (60A\/104A V1)\u003c\/p\u003e\n\u003cp\u003eThe MATEK F405-Wing V2 is a dedicated flight controller that has been designed specifically for fixed wing aircraft. It features a built in PDB and multiple high output BEC’s. Some of these have a variable voltage output, determined by the use of jumpers. BEC options include: 5\/6\/7.2V 5A BEC for servos, 9\/12V 2A for video transmitter, camera or gimbal, and 5V 2A BEC for RC receiver, camera, buzzer, GPS, LEDs and other electronics. A 3-6S Lipo battery can be used to power the board. This FC also has a number of built in features such as 6 usable UARTS ports, 10 PWM outputs, Micro SD for blackbox logging, barometer and built in On Screen Display (OSD). The MATEK F405-Wing V2 can be used with iNav 6.0 or later firmware (MATEKF405SE) and ArduPilot 4.4 or later (MATEKF405-Wing).\u003c\/p\u003e\n\u003cp\u003eThis is the perfect flight controller to stabilise your FPV aircraft and to send all the information back to you via the built in OSD.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: STM32F405RGT6, 168MHz , 1MB Flash\u003c\/li\u003e\n\u003cli\u003eIMU: ICM42688-P\u003c\/li\u003e\n\u003cli\u003eBaro: DPS310\u003c\/li\u003e\n\u003cli\u003eOSD: AT7456E\u003c\/li\u003e\n\u003cli\u003eBlackbox: MicroSD card slot\u003c\/li\u003e\n\u003cli\u003eBuilt in inverter for SBUS input\u003c\/li\u003e\n\u003cli\u003eUSB Type-C(USB2.0)\u003c\/li\u003e\n\u003cli\u003eArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)\u003c\/li\u003e\n\u003cli\u003eINAV: MATEKF405SE (INAV 6.0 or newer)\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 9~30V (3~6S LiPo) w\/TVS protection\u003c\/li\u003e\n\u003cli\u003eCurrent Senor: 220A,  3.3V ADC  (INAV scale 150,  ArduPilot 66.7A\/V)\u003c\/li\u003e\n\u003cli\u003eSense resistor: 100A continuous, 220A peak\u003c\/li\u003e\n\u003cli\u003eBattery Voltage divider 1K:10K (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)\u003c\/li\u003e\n\u003cli\u003eDesigned for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed\u003c\/li\u003e\n\u003cli\u003eContinuous current: 2 Amps\u003c\/li\u003e\n\u003cli\u003eDesigned for Video Transmitter, Camera, Gimbal ect.\u003c\/li\u003e\n\u003cli\u003eContinuous current: 2 Amps\u003c\/li\u003e\n\u003cli\u003e12V option with Jumper pad\u003c\/li\u003e\n\u003cli\u003efor stable 9V\/12V output, input voltage should \u0026gt; output voltage +1V\u003c\/li\u003e\n\u003cli\u003eDesigned for Servos\u003c\/li\u003e\n\u003cli\u003eVoltage adjustable, 5V Default, 6V or 7.2V options\u003c\/li\u003e\n\u003cli\u003eContinuous current: 5 Amps,  6A Peak\u003c\/li\u003e\n\u003cli\u003efor stable Vx output, input voltage should \u0026gt; Vx voltage +1V\u003c\/li\u003e\n\u003cli\u003eDesigned for external 3.3V peripherals\u003c\/li\u003e\n\u003cli\u003eLinear Regulator\u003c\/li\u003e\n\u003cli\u003eContinuous current: 200mA\u003c\/li\u003e\n\u003cli\u003eMounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 54 x 36 x 13 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6x UARTs,  1x Softserial_Tx option(INAV)\u003c\/li\u003e\n\u003cli\u003e10x PWM outputs\u003c\/li\u003e\n\u003cli\u003e2x I2C\u003c\/li\u003e\n\u003cli\u003e3x ADC (VBAT, Current, RSSI)\u003c\/li\u003e\n\u003cli\u003e1x Matek F405 Wing V2 Flight Controller\u003c\/li\u003e\n\u003cli\u003e3x header Pin rows (board is shipped unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":58941161439564,"sku":"FC-F405-WINGV2","price":49.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/F405-Wing-V2.jpg?v=1790286359","url":"https:\/\/dronepart.co.uk\/products\/matek-f405-wing-v2-fixed-wing-inav-flight-controller-pdb","provider":"My Store","version":"1.0","type":"link"}