{"product_id":"matek-2-4ghz-r24-p6v-elrs-6ch-pwm-vario-receiver","title":"Matek 2.4GHz R24-P6V ELRS 6CH PWM Vario Receiver","description":"\u003cp\u003eThis ExpressLRS receiver from Matek is equipped with a vario (SPL06-001 barometer) to indicate the ascensional speed. This feature is particularly useful for glider pilots who need to locate and stay within thermal lift without constantly monitoring their transmitter.\u003c\/p\u003e\n\u003cp\u003eEquipped with an ESP32 processor and SX1281 RF chip, the R24-P6V operates on the 2.4GHz frequency band and features 6 PWM outputs for connecting servos or other peripherals. The receiver supports 2-6S LiPo battery voltage sensing, allowing you to monitor your aircraft’s power status in real-time.\u003c\/p\u003e\n\u003cp\u003eThis compact receiver utilises the ExpressLRS protocol, ensuring fast, reliable, and low-latency control for your aircraft.\u003c\/p\u003e\n\u003cp\u003ePlease note, the header pins are included but don’t come soldered.\u003c\/p\u003e\n\u003cp\u003eFirmwares\u003c\/p\u003e\n\u003cp\u003eExpressLRS, wiki, Click HERE\u003c\/p\u003e\n\u003cp\u003eReceiver Target: Generic ESP32 PWM Vario 2.4Ghz RX, \/or RadioMaster ER6-GV, \/or RadioMaster ER6-G\u003c\/p\u003e\n\u003cp\u003eReceiver has ExpressLRS 3.3.2 preloaded with binding phrase “123456”, the Receiver will never enter binding mode if using the traditional binding procedure.\u003c\/p\u003e\n\u003cp\u003eYou need to reflash it with your binding phrase OR connect it to your PC\/phone via WiFi and set your binding phrase in WebUI.\u003c\/p\u003e\n\u003cp\u003eTips\u003c\/p\u003e\n\u003cp\u003eFull Resolution Switch Configuration Modes\u003c\/p\u003e\n\u003cp\u003ePowering receiver with Reverse Voltage will damage the regulator chip. DOUBLE CHECK the power wires connected to the receiver.\u003c\/p\u003e\n\u003cp\u003eTransmitter fw version should be EdgeTX 2.7.1\/OpenTX 2.3.15 or newer\u003c\/p\u003e\n\u003cp\u003e——————————————————-\u003c\/p\u003e\n\u003cp\u003eFlashing via Wifi\u003c\/p\u003e\n\u003cp\u003ePower on receiver. Receiver’s LED(Red) will blink slow at first, and after 30s, it should blink fast indicating it’s on Wifi Hotspot Mode.\u003c\/p\u003e\n\u003cp\u003eWifi SSID “ExpressLRS RX”, Password “expresslrs”\u003c\/p\u003e\n\u003cp\u003eMore detailed steps, pls refer this page .\u003c\/p\u003e\n\u003cp\u003eFlashing via UART\u003c\/p\u003e\n\u003cp\u003eDisconnect ESC and servos from receiver first.\u003c\/p\u003e\n\u003cp\u003eWire the receiver into the USB-TTL adapter, with TX(PWM 2 pin) on receiver connected to the Rx on the USB-TTL, and RX(PWM 3 pin) on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to “V” and GND of the Receiver.\u003c\/p\u003e\n\u003cp\u003ePress the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid on.\u003c\/p\u003e\n\u003cp\u003eIn configurator, Select the target Generic ESP32 PWM Vario 2.4Ghz RX, or RadioMaster ER6-GV and “ UART ” for Flashing Method, set your bind phrase and Firmware Options , Check “ erase before flash ” and “ Force FLash “.\u003c\/p\u003e\n\u003cp\u003eWeb-flasher https:\/\/expresslrs.github.io\/web-flasher\/\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-PICO-D4, SX1281, ExpressLRS Firmware\u003c\/li\u003e\n\u003cli\u003ePA\/LNA: SE2431L\u003c\/li\u003e\n\u003cli\u003eRF Frequency: 2.4GHz ISM\u003c\/li\u003e\n\u003cli\u003eTelemetry power: 22.5dbm (180mW)\u003c\/li\u003e\n\u003cli\u003eDiversity: Antenna-switching, default ANT1\u003c\/li\u003e\n\u003cli\u003eBarometer SPL06-001 (Vario)\u003c\/li\u003e\n\u003cli\u003eReceiver output:  6x PWM CH\u003c\/li\u003e\n\u003cli\u003eVBAT voltage sense: 0~25.5V\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX MHF-1\u003c\/li\u003e\n\u003cli\u003ePower supply: 4-13V DC @ “V” Pad\u003c\/li\u003e\n\u003cli\u003ePower dissipation:  60mA~80mA@5V IN\u003c\/li\u003e\n\u003cli\u003ePCB size: 30mm x 18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4g w\/ antenna\u003c\/li\u003e\n\u003cli\u003eDupont 2.54 pins (Board is shipped unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x ELRS R24-P6V receiver\u003c\/li\u003e\n\u003cli\u003e2x IPEX MHF1 15cm antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":58941157310796,"sku":"RX-MTELRS-R24-P6V","price":26.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/R24-P6V.jpg?v=1790286342","url":"https:\/\/dronepart.co.uk\/products\/matek-2-4ghz-r24-p6v-elrs-6ch-pwm-vario-receiver","provider":"My Store","version":"1.0","type":"link"}