{"product_id":"holybro-x500-v2-quadcopter-px4-development-kit","title":"Holybro X500 V2 Quadcopter PX4 Development Kit","description":"\u003cp\u003ePX4 Development Kit – X500 v2 is an affordable, lightweight, and robust carbon fibre professional development drone kit with the latest Holybro Pixhawk 6C Flight Controller or Pixhawk 6X Autopilot Flight Controller , M10 GPS , and plug \u0026amp; play SiK Telemetry Radio . It is quick and easy to assemble (~30 minutes) without the need of soldering, so you can spend more time flying and developing instead. It comes with the X500 V2 Frame Kit and motors, ESCs, power distribution boards and extra propellers. The Drone Arms are pre-installed with Motors and ESCs so they can be plugged right into the power distribution board without the need of soldering.\u003c\/p\u003e\n\u003cp\u003eThe Frame ( X500 v2 ) is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier \u0026amp; more straightforward installation. The landing gear consists of 16mm \u0026amp; 10mm diameter carbon fibre tubes with connectors that has been thickened and strengthened. The X500 V2 Frame Kit is available separately here , also see for more information about the X500.\u003c\/p\u003e\n\u003cp\u003eThe platform board now has mounting holes for GPS \u0026amp; popular companion computers such as the Raspberry Pi 4 \u0026amp; Jetson Nano. There is an optional Depth Camera Mount (purchase separately) for various depth cameras such as the Intel RealSense series \u0026amp; Structure Core Depth Cameras. The spacing between top and bottom carbon fiber plates has been increased to provide an easier access. The adjustable battery mounting board has been enlarged to support bigger batteries for longer flight time. The rail mounting system is ready to take a whole host of camera mounts and gimbals for various applications. All tools for installation are provided in the package.\u003c\/p\u003e\n\u003cp\u003eNote: The Pixhawk 6C\/6X Flight controller is compatible with both PX4 \u0026amp; Ardupilot, but it is shipped with PX4 open source Autopilot firmware.\u003c\/p\u003e\n\u003cp\u003eAssembly guide​ HERE\u003c\/p\u003e\n\u003cp\u003eNotice: Relating to controller Pixhawk 6X, Currently shipping REV 8, it has 3x ICM-45686 IMU with BalancedGyro™ Technology, please see this page for the latest firmware support information.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePixhawk 6C Flight Controller or Pixhawk 6X Autopilot Flight Controller with M10 GPS and Plug \u0026amp; play SiK Telemetry Radio\u003c\/li\u003e\n\u003cli\u003eNew frame design with minimal assembly time (~30 minutes), No soldering required\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber frame with fiber-reinforced nylon connectors providing easy \u0026amp; straightforward installation\u003c\/li\u003e\n\u003cli\u003ePre-installed motors \u0026amp; ESCs with simple XT30 power plugs for PDB\u003c\/li\u003e\n\u003cli\u003ePower distribution board (PDB) with XT60 \u0026amp; XT30 plugs\u003c\/li\u003e\n\u003cli\u003eMount for companion computer such as Raspberry Pi \u0026amp; Nvidia Jetson Nano\u003c\/li\u003e\n\u003cli\u003eOptional depth camera mount for Intel RealSense \u0026amp; Structure Core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePX4 Development Kit – X500 v2 Includes:\u003c\/p\u003e\n\u003cp\u003ePixhawk 6C Flight Controller \/ Pixhawk 6X Autopilot Flight Controller\u003c\/p\u003e\n\u003cp\u003ePM02 V3-12S Power Module\u003c\/p\u003e\n\u003cp\u003eM10 GPS\u003c\/p\u003e\n\u003cp\u003eSiK Telemetry Radio V3 433\/915MHz\u003c\/p\u003e\n\u003cp\u003eX500 V2 Frame Kit\u003c\/p\u003e\n\u003cp\u003ePreinstalled Items: Motors – Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug ESCs – BLHeli S ESC 20A (4 pcs) with XT30 Plugs – Compatible with 4S Battery Recommend 4S 2000-5000mAh Lipo Battery (Not Included)\u003c\/p\u003e\n\u003cp\u003eMotors – Holybro 2216 KV920 Motor (4 pcs) with XT30 Plug\u003c\/p\u003e\n\u003cp\u003eESCs – BLHeli S ESC 20A (4 pcs) with XT30 Plugs – Compatible with 4S Battery Recommend 4S 2000-5000mAh Lipo Battery (Not Included)\u003c\/p\u003e\n\u003cp\u003eRecommend 4S 2000-5000mAh Lipo Battery (Not Included)\u003c\/p\u003e\n\u003cp\u003e1045 Propellers (6 pcs)\u003c\/p\u003e\n\u003cp\u003ePower Distribution Board (XT60 plug for battery \u0026amp; XT30 plug for ESCs \u0026amp; peripherals)\u003c\/p\u003e\n\u003cp\u003eOther Optional Items (Sold Seperately) RadioMaster TX16S RC Controller RadioMaster R81 Receiver Depth Camera Mount\u003c\/p\u003e\n\u003cp\u003eRadioMaster TX16S RC Controller\u003c\/p\u003e\n\u003cp\u003eRadioMaster R81 Receiver\u003c\/p\u003e\n\u003cp\u003eDepth Camera Mount\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBody – Full Carbon Fiber Top \u0026amp; Bottom plate (144 x 144mm, 2mm thick)\u003c\/li\u003e\n\u003cli\u003eArm – High strength \u0026amp; ultra-lightweight 16mm carbon fiber tubes with newly designed fiber reinforced nylon connectors\u003c\/li\u003e\n\u003cli\u003eLanding gear – 16mm \u0026amp; 10mm diameter carbon fiber tubes with strengthened \u0026amp; improved plastic tee connectors.\u003c\/li\u003e\n\u003cli\u003ePlatform board – With mounting holes for GPS \u0026amp; popular companion computer such as the Raspberry Pi 4 \u0026amp; Jetson Nano\u003c\/li\u003e\n\u003cli\u003eDual 10mm Ø rod x 250 mm long rail mounting system\u003c\/li\u003e\n\u003cli\u003eBattery mount with two Battery Straps\u003c\/li\u003e\n\u003cli\u003eHand tools for installation\u003c\/li\u003e\n\u003cli\u003eWheelbase: 500mm\u003c\/li\u003e\n\u003cli\u003eMotor mount pattern: 16x16mm\u003c\/li\u003e\n\u003cli\u003eFrame Body: 144x144mm, 2mm thick\u003c\/li\u003e\n\u003cli\u003eLanding gear height: 215mm\u003c\/li\u003e\n\u003cli\u003eSpace between top and bottom plates: 28mm\u003c\/li\u003e\n\u003cli\u003eWeight: 610g\u003c\/li\u003e\n\u003cli\u003eFlight time: ~18 minutes hover with no additional payload. Tested with 5000mAh Battery.\u003c\/li\u003e\n\u003cli\u003eMax payload: ~1kg (w\/ 4S 5000 mAh battery @70% Throttle)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Pixhawk 6X","offer_id":58941094134092,"sku":"KIT-X500V2PX46X","price":744.9,"currency_code":"GBP","in_stock":true},{"title":"Pixhawk 6C","offer_id":58941094166860,"sku":"KIT-X50030188","price":644.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/X500-V2-Quadcopter-PX4-Development-Kit.jpg?v=1790286106","url":"https:\/\/dronepart.co.uk\/products\/holybro-x500-v2-quadcopter-px4-development-kit","provider":"My Store","version":"1.0","type":"link"}