{"product_id":"holybro-ublox-m10-gps-compass-module-w-mount","title":"Holybro Ublox M10 GPS Compass Module w\/ Mount","description":"\u003cp\u003eThe M10 GPS is replacing Holybro’s popuar M8N GPS (previously also known as Pixhawk 4 GPS ). The M10 GPS uses the faster and more accurate Ublox 10th Gen GNSS.\u003c\/p\u003e\n\u003cp\u003eThe M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently. The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.\u003c\/p\u003e\n\u003cp\u003eIt also comes with the IST8310 compass, tricolored LED indicator, buzzer and a safety switch.\u003c\/p\u003e\n\u003cp\u003eThere are 3 different connectors options for different purposes.\u003c\/p\u003e\n\u003cp\u003eThis module ships with a baud rate of 115200 5Hz.\u003c\/p\u003e\n\u003cp\u003eFirmware Support for M10 GPS:\u003c\/p\u003e\n\u003cp\u003ePX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.\u003c\/p\u003e\n\u003cp\u003eAs of Sept 7th 2023, PX4 has released 1.14 RC1 (release candidate). Please check this link for the latest release detail. More details on how to flash RC release can be found here.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNewest Ublox 10th Gen GNSS\u003c\/li\u003e\n\u003cli\u003eFast \u0026amp; Accurate Positioning\u003c\/li\u003e\n\u003cli\u003eHigh-gain 25x25x4mm antenna\u003c\/li\u003e\n\u003cli\u003eIST8310 Compass\u003c\/li\u003e\n\u003cli\u003eInternal Buzzer, Safety switch\u003c\/li\u003e\n\u003cli\u003eUltra Bright UI RGB LED\u003c\/li\u003e\n\u003cli\u003ePIN MAP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: For Ardupilot User, if you are unable to perform normal compass calibration “compass dance” for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.\u003c\/p\u003e\n\u003cp\u003eDifference between the three cable options\u003c\/p\u003e\n\u003cp\u003eSKU12040 – Holybro M10 GPS (JST GHR1.25mm 10pin cable):\u003c\/p\u003e\n\u003cp\u003eThis option is the most common, it is used on the This connector can be used on Pixhawk Standard Flight Controller 10pin “GPS Module”or “GPS1” input port.\u003c\/p\u003e\n\u003cp\u003eSKU12042 – Holybro M10 Secondary GPS (JST GHR1.25mm 6pin cable):\u003c\/p\u003e\n\u003cp\u003eThis connector can be used on Pixhawk Standard Flight Controller 6pin “UART \u0026amp; I2C” or “GPS2” input port as secondary GPS. This GPS is also compatible with the Cube Flight Controller GPS2 Port.\u003c\/p\u003e\n\u003cp\u003eSKU12041 – Holybro M10 GPS for Pix32 \u0026amp; Pixhawk1\/2.4.6\/2.4.8 (Molex1.25mm 6pin \u0026amp; 4pin \u0026amp;3pin cable):\u003c\/p\u003e\n\u003cp\u003eThese connectors are for “Switch”, “GPS”, and “I2C” input ports on the Pix32\/Pixhawk1\/Pixhawk 2.4.6\/2.4.8\u003c\/p\u003e\n\u003cp\u003eReference Links:\u003c\/p\u003e\n\u003cp\u003eHolybro Documentation\u003c\/p\u003e\n\u003cp\u003eDimension\u003c\/p\u003e\n\u003cp\u003e3D CAD File Downloads\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGNSS Receiver: Ublox M10\u003c\/li\u003e\n\u003cli\u003eNumber of Concurrent GNSS: Up to 4 GNSS – BeiDou – Galileo – GLONASS – GPS – QZSS\u003c\/li\u003e\n\u003cli\u003eFrequency Band: GPS L1 – Galileo E1 – GLONASS L1 – BeiDou B1 – SBAS L1 – QZSS L1\u003c\/li\u003e\n\u003cli\u003eCompass: IST8310\u003c\/li\u003e\n\u003cli\u003eOutput Protocol: UBX (U-blox) – NMEA\u003c\/li\u003e\n\u003cli\u003eAccuracy: 2.0m CEP\u003c\/li\u003e\n\u003cli\u003eNav. Update Rate: Up to 25 Hz (single GNSS), Up to 10 Hz (4 concurrent GNSS)\u003c\/li\u003e\n\u003cli\u003eGNSS Augmentation System: EGNOS, GAGAN, MSAS and WAAS QZSS: L1S\u003c\/li\u003e\n\u003cli\u003eDefault Baud Rate: 115200\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 4.7-5.2V\u003c\/li\u003e\n\u003cli\u003ePort Type: JST-GH-10P\u003c\/li\u003e\n\u003cli\u003eAntenna: 25 x 25 x 4 mm ceramic patch antenna\u003c\/li\u003e\n\u003cli\u003ePower consumption: Less than 200mA @ 5V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40~80C\u003c\/li\u003e\n\u003cli\u003eDimension: φ50 x14.4 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 32g\u003c\/li\u003e\n\u003cli\u003eCable Length: 26cm (42cm cable purchase separately)\u003c\/li\u003e\n\u003cli\u003eOther: ​ Tri-color LED Onboard Buzzer Safety Switch LNA MAX2659ELT+ RF Amplifier Rechargeable Farah capacitance Low noise 3.3V regulator\u003c\/li\u003e\n\u003cli\u003e​ Tri-color LED\u003c\/li\u003e\n\u003cli\u003eOnboard Buzzer\u003c\/li\u003e\n\u003cli\u003eSafety Switch\u003c\/li\u003e\n\u003cli\u003eLNA MAX2659ELT+ RF Amplifier\u003c\/li\u003e\n\u003cli\u003eRechargeable Farah capacitance\u003c\/li\u003e\n\u003cli\u003eLow noise 3.3V regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x M10 GPS Module\u003c\/li\u003e\n\u003cli\u003e1x Fixed Carbon Fiber GPS mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Pixhawk Series","offer_id":58941092135244,"sku":"GPS-HB-NEOM10-12040","price":49.9,"currency_code":"GBP","in_stock":true},{"title":"Pixhawk 2nd GPS \/ Cube FC","offer_id":58941092168012,"sku":"GPS-HB-NEOM10-12042","price":43.9,"currency_code":"GBP","in_stock":false},{"title":"Pix32 \/ Original Pixhawk","offer_id":58941092200780,"sku":"GPS-HB-NEOM10-12041","price":43.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/SKU12040-M10-Standard-GPS.jpg?v=1790286098","url":"https:\/\/dronepart.co.uk\/products\/holybro-ublox-m10-gps-compass-module-w-mount","provider":"My Store","version":"1.0","type":"link"}