{"product_id":"holybro-tekko32-f4-metal-4-in-1-65a-esc-am32-dshot-1200","title":"Holybro Tekko32 F4 Metal 4-in-1 65A ESC (AM32) Dshot 1200","description":"\u003cp\u003eSince support for BLHeli32 has ended, this ESC is now flashed with AM32_Firmware.\u003c\/p\u003e\n\u003cp\u003eF4 MCU @150Mhz \/ Metal-Cased MOSFET \/ PWM output: 16k ~96k PWM \/ 4~6S \/ AM32_Firmware\u003c\/p\u003e\n\u003cp\u003eLooking for a 4-in-1 ESC that can handle a powerful 6S motor setup? Look no further than the Holybro Tekko32 Metal 4-in-1 ESC. It supports 4-6S and thanks to its new metal encased mosfets and substantial copper busbar which can dissipate lots of heat quickly, its rated at a massive 65amp per channel. Furthermore, while most other ESCs are still running an F0 MCU, this ESC boasts a super fast F4 processor. The F4 MCU allows tons of headroom for processing power, ensuring smooth and fast response.\u003c\/p\u003e\n\u003cp\u003eFor 6S setups it’s recommended to use the included extra low ESR 35V capacitor.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew \u0026amp; faster F4 MCU @ 150Mhz (compared to F3 @108Mhz \u0026amp; F0 @48Mhz)\u003c\/li\u003e\n\u003cli\u003ePWM Frequency: 16k to 96k\u003c\/li\u003e\n\u003cli\u003eMetal-cased MOSFET for excellent heat dissipation\u003c\/li\u003e\n\u003cli\u003eMassive on-board capacitance for noise filtering at 2068uf\u003c\/li\u003e\n\u003cli\u003e3 oz copper PCB design to allow bigger current and better heat dissipation\u003c\/li\u003e\n\u003cli\u003eSeparate drive \u0026amp; control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: The latest Tekko32F3 Metal 4in1 ESC has made various improvements on its performance compared to the previous version\u003c\/p\u003e\n\u003cp\u003e1) Better optimized power path, providing a more stable performance. 2) Doubled capacity of on-board capacitors, now capable of 2068uf. 3) Amperage meter scale ratio has been adjusted to 168. 4) Added 3 fault detection indicators to indicate faults better. 5) Enhanced and more robust Lipo input pad for soldering. 6) PCB with 3oz copper design, capable of handling bigger current, and better heat dissipation capacity. 7) The PCB design uses a design in which the drive circuit and the control circuit are separated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.\u003c\/p\u003e\n\u003cp\u003eNote:\u003c\/p\u003e\n\u003cp\u003eAir flow for the ESC is very important if you want to run this 4in1 in high current. The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered.\u003c\/p\u003e\n\u003cp\u003eSome Tips:\u003c\/p\u003e\n\u003cp\u003eESC Current Sensor Scale\u003c\/p\u003e\n\u003cp\u003eAM32 ESC Firmware Overview\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous Current: 65A x4\u003c\/li\u003e\n\u003cli\u003eBurst Current: 75A x4\u003c\/li\u003e\n\u003cli\u003eSupports 4-6S battery\u003c\/li\u003e\n\u003cli\u003eSupports DShot 150\/300\/600\/1200 \u0026amp; MultiShot\/OneShot\/Proshot\/PWM etc.\u003c\/li\u003e\n\u003cli\u003eESC telemetry Supported\u003c\/li\u003e\n\u003cli\u003eOnboard analog current sensor\u003c\/li\u003e\n\u003cli\u003eNo output BEC\u003c\/li\u003e\n\u003cli\u003eAM32 firmware\u003c\/li\u003e\n\u003cli\u003e1000uf 35v capacitor included (highly recommended for 6s setup)\u003c\/li\u003e\n\u003cli\u003eAmperage meter scale ratio: 180\u003c\/li\u003e\n\u003cli\u003eDimensions: 43 x 44mm \/ Weight: 15.8g\u003c\/li\u003e\n\u003cli\u003eMounting holes: M4 30.5×30.5mm (M3 grommets included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Tekko32 F4 Metal 4in1 65A ESC\u003c\/li\u003e\n\u003cli\u003e4x M3 Anti-Vibration Silicone Grommet Insert\u003c\/li\u003e\n\u003cli\u003e1x Electrolytic capacitor: 1000uF 35v\u003c\/li\u003e\n\u003cli\u003e1x 8pin to 8pin 1mm pitch 65mm cable\u003c\/li\u003e\n\u003cli\u003e1x 8pin to 8pin 1mm pitch 25mm cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":58941090627916,"sku":"ESC-HB-4IN1-TEK65","price":89.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Holybro-F4-4in1-ESC.jpg?v=1790286093","url":"https:\/\/dronepart.co.uk\/products\/holybro-tekko32-f4-metal-4-in-1-65a-esc-am32-dshot-1200","provider":"My Store","version":"1.0","type":"link"}