{"product_id":"holybro-remote-id-module-for-arduremoteid","title":"Holybro Remote ID Module for ArduRemoteID","description":"\u003cp\u003eImportant: This product is designed for the Standard Remote ID Solution , primarily targeting drone manufacturers and system integrators, NOT for DIY users, as you need to do your own approval process at the FAA (DoC submission) if you are in the USA. This product does not include serial number. For the most accurate and latest information related to this topic, please refer to the official governance website of your country.\u003c\/p\u003e\n\u003cp\u003eRemote IDs (aka Drone IDs) are becoming a legal requirement in some countries, Holybro have a solution.\u003c\/p\u003e\n\u003cp\u003eHolybro RemoteID Module is a low-cost, small-size, and light-weight module that broadcasts information about UAVs in flight through WiFi and Bluetooth. It supports both CAN and serial protocols. It is a FCC and CE-approved radio module.\u003c\/p\u003e\n\u003cp\u003eThe products run open-source firmware (ArduRemoteID) and provides a so-called standard Remote ID solution , primarily target drone manufacturers \u0026amp; system integrators.\u003c\/p\u003e\n\u003cp\u003eNote : This product is designed for the Standard Remote ID Solution , primarily targeting drone manufacturers and system integrators, as you need to do your own approval process at the FAA (DoC submission) if you are in the USA. This product does not include serial number. For the most accurate and latest information related to this topic, please refer to the official governance website of your country.\u003c\/p\u003e\n\u003cp\u003e* The detection range depends on many factors such as the receiver antenna gain, transmission protocol, weather conditions, flying height, receiver height line of sight etc. With professional receivers a range of 5 km and more is possible.\u003c\/p\u003e\n\u003cp\u003eGuides \u0026amp; Reference Links:\u003c\/p\u003e\n\u003cp\u003eHolybro Doc Setup \u0026amp; Configuration Guide Firmware Update Guide Firmware support\u003c\/p\u003e\n\u003cp\u003eSetup \u0026amp; Configuration Guide\u003c\/p\u003e\n\u003cp\u003eFirmware Update Guide\u003c\/p\u003e\n\u003cp\u003eFirmware support\u003c\/p\u003e\n\u003cp\u003eArdupilot Ardupilot Wiki – RemoteID Ardupilot Wiki – OpenDroneID FW building\u003c\/p\u003e\n\u003cp\u003eArdupilot Wiki – RemoteID\u003c\/p\u003e\n\u003cp\u003eArdupilot Wiki – OpenDroneID FW building\u003c\/p\u003e\n\u003cp\u003ePX4 PX4 Guide on Remote ID\/OpenDroneID\u003c\/p\u003e\n\u003cp\u003ePX4 Guide on Remote ID\/OpenDroneID\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRadio module: Espressif ESP-C3 module Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW) FCC \u0026amp; CE certified radio module\u003c\/li\u003e\n\u003cli\u003eEspressif ESP-C3 module\u003c\/li\u003e\n\u003cli\u003eBluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW)\u003c\/li\u003e\n\u003cli\u003eFCC \u0026amp; CE certified radio module\u003c\/li\u003e\n\u003cli\u003eFirmware: ArduRemoteID ( https:\/\/github.com\/ArduPilot\/ArduRemoteID ). Supports upgrading firmware via the web interface (“OTA”)\u003c\/li\u003e\n\u003cli\u003eArduRemoteID ( https:\/\/github.com\/ArduPilot\/ArduRemoteID ).\u003c\/li\u003e\n\u003cli\u003eSupports upgrading firmware via the web interface (“OTA”)\u003c\/li\u003e\n\u003cli\u003eSupported in PX4 \u0026amp; Ardupilot ( More Info )\u003c\/li\u003e\n\u003cli\u003eProtocol: CAN \u0026amp; Serial\u003c\/li\u003e\n\u003cli\u003eInterface: 1x JST GH 4-pin CAN (CAN) port 1x JST GH 6-pin TELEM (UART) port\u003c\/li\u003e\n\u003cli\u003eAntenna Connector type: On CNC Case: SMA connector On PCB: IPEX Connector\u003c\/li\u003e\n\u003cli\u003eOn CNC Case: SMA connector\u003c\/li\u003e\n\u003cli\u003eOn PCB: IPEX Connector\u003c\/li\u003e\n\u003cli\u003eRange: \u0026gt; 5km detection range*\u003c\/li\u003e\n\u003cli\u003ePower: 5V supplied from TELEM or CAN port\u003c\/li\u003e\n\u003cli\u003eLED lights: Bright RGB status LED\u003c\/li\u003e\n\u003cli\u003eSize: Without case: 35.3 x 23.5 mm (not including antenna) With CNC case: 38 x 26.5 x 11.5 mm (not including antenna)\u003c\/li\u003e\n\u003cli\u003eWithout case: 35.3 x 23.5 mm (not including antenna)\u003c\/li\u003e\n\u003cli\u003eWith CNC case: 38 x 26.5 x 11.5 mm (not including antenna)\u003c\/li\u003e\n\u003cli\u003eMount: M2 screws\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40°C to +85°C\u003c\/li\u003e\n\u003cli\u003eWeight: PCB only: 4 g With CNC case \u0026amp; Antenna: 27.5g Without case \u0026amp; Antenna: 16.5g (Cable 20cm)\u003c\/li\u003e\n\u003cli\u003ePCB only: 4 g\u003c\/li\u003e\n\u003cli\u003eWith CNC case \u0026amp; Antenna: 27.5g\u003c\/li\u003e\n\u003cli\u003eWithout case \u0026amp; Antenna: 16.5g (Cable 20cm)\u003c\/li\u003e\n\u003cli\u003eCertification: FCC \u0026amp; CE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x JST GH 4-pin CAN (CAN) port\u003c\/li\u003e\n\u003cli\u003e1x JST GH 6-pin TELEM (UART) port\u003c\/li\u003e\n\u003cli\u003e1x Remote ID\u003c\/li\u003e\n\u003cli\u003e1x Antenna\u003c\/li\u003e\n\u003cli\u003e1x JST GH 6pin 150mm Cable\u003c\/li\u003e\n\u003cli\u003e1x JST GH 4pin 150mm Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Cased","offer_id":58941084533068,"sku":"FC-REMIDCASE2-18089","price":31.9,"currency_code":"GBP","in_stock":true},{"title":"Un-Cased","offer_id":58941084565836,"sku":"FC-REMIDCASE2-18089A","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Holybro-18089-Remote-ID.jpg?v=1790286069","url":"https:\/\/dronepart.co.uk\/products\/holybro-remote-id-module-for-arduremoteid","provider":"My Store","version":"1.0","type":"link"}