{"product_id":"holybro-pm08d-can-power-module-14s-200a","title":"Holybro PM08D-CAN Power Module 14S 200A","description":"\u003cp\u003eThis PM08D-CAN Power Module supply provides regulated 5.3V to flight controller from the battery while providing current consumption and battery voltage measurements to the Flight controller. This power module connects to compatible controllers via DroneCan Communication Protocol.\u003c\/p\u003e\n\u003cp\u003eThis Power Module has two 5.3V power output port with independent circuits, BEC IC and circuitry that can provide redundant power to the flight controller.\u003c\/p\u003e\n\u003cp\u003eThis power module is designed for vehicle with high power requirements. It comes housed in a aluminum heat sink case, protecting the module from external elements and actively dissipates heat generated during operation to ensures durability and optimal performance.\u003c\/p\u003e\n\u003cp\u003eWhat is DroneCan: DroneCAN is the primary CAN protocol used by the ArduPilot and PX4 projects for communication with CAN peripherals. It is an open protocol with open communication, specification and multiple open implementations. More info here .\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 2-14S \u0026amp; 200A Cont, 400A Burst\u003c\/li\u003e\n\u003cli\u003eDroneCAN Communication Protocol\u003c\/li\u003e\n\u003cli\u003eSmall \u0026amp; Compact Design\u003c\/li\u003e\n\u003cli\u003eTwo 5V Output with Independent BEC IC and Circuitry\u003c\/li\u003e\n\u003cli\u003eSeparated Sensor and BEC Board to Minimize Electrical Noise Interference\u003c\/li\u003e\n\u003cli\u003eGalvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)\u003c\/li\u003e\n\u003cli\u003eHigh Accuracy Temperature Sensor for Temperature Monitor\u003c\/li\u003e\n\u003cli\u003eHigh-Efficiency Aluminum Heat Dissipation Shell\u003c\/li\u003e\n\u003cli\u003ePin out\u003c\/li\u003e\n\u003cli\u003eStatus LED\u003c\/li\u003e\n\u003cli\u003eFlashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash\u003c\/li\u003e\n\u003cli\u003eFlashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection\u003c\/li\u003e\n\u003cli\u003eFlashing slowly (one-second intervals): CAN is successfully connected\u003c\/li\u003e\n\u003cli\u003eInterface Type\u003c\/li\u003e\n\u003cli\u003ePower \u0026amp; CAN Port: Molex CLIK-Mate 2mm 6Pin\u003c\/li\u003e\n\u003cli\u003eBattery IN\/OUT Option ( select version as required ): XT90 Connectors Tinned Wires XT90 \u0026amp; Ring Terminals\u003c\/li\u003e\n\u003cli\u003eXT90 Connectors\u003c\/li\u003e\n\u003cli\u003eTinned Wires\u003c\/li\u003e\n\u003cli\u003eXT90 \u0026amp; Ring Terminals\u003c\/li\u003e\n\u003cli\u003eReference Links\u003c\/li\u003e\n\u003cli\u003ePX4 \u0026amp; Autopilot Setup Instruction\u003c\/li\u003e\n\u003cli\u003ePM08CAN 3D CAD File Dow nload\u003c\/li\u003e\n\u003cli\u003eP ower Module Dimension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor：STM32F405RG 168MHz 1024KB Flash  196KB RAM\u003c\/li\u003e\n\u003cli\u003eVoltage input: 7~60.9V (2S~14S)\u003c\/li\u003e\n\u003cli\u003eContinuous current:200A\u003c\/li\u003e\n\u003cli\u003eBurst current 400A @ 25℃ 1 sec 1000A @ 25℃ \u0026lt; 1 sec\u003c\/li\u003e\n\u003cli\u003e400A @ 25℃ 1 sec\u003c\/li\u003e\n\u003cli\u003e1000A @ 25℃ \u0026lt; 1 sec\u003c\/li\u003e\n\u003cli\u003eMax current sensing: 376A\u003c\/li\u003e\n\u003cli\u003eVoltage accuracy: ±0.1V\u003c\/li\u003e\n\u003cli\u003eCurrent accuracy: ±5%\u003c\/li\u003e\n\u003cli\u003eTemperature accuracy:±1℃\u003c\/li\u003e\n\u003cli\u003ePower port output: 5.3V\/3A each port\u003c\/li\u003e\n\u003cli\u003eProtocol: DroneCAN\u003c\/li\u003e\n\u003cli\u003eOperating temperature :-25℃~105℃\u003c\/li\u003e\n\u003cli\u003eFirmware upgrade: Support\u003c\/li\u003e\n\u003cli\u003eCalibration:  Support\u003c\/li\u003e\n\u003cli\u003eSize: 45mm×41mm×26mm (Not Include Cable)\u003c\/li\u003e\n\u003cli\u003eWeight: 185g (Include Cable)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"XT90 Connectors","offer_id":58941082566988,"sku":"FC-15028","price":84.9,"currency_code":"GBP","in_stock":true},{"title":"Tinned Wires","offer_id":58941082599756,"sku":"FC-15029","price":84.9,"currency_code":"GBP","in_stock":true},{"title":"XT90 \u0026 Ring Terminal","offer_id":58941082632524,"sku":"FC-15030","price":84.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Holybro-PM08-CAN.jpg?v=1790286060","url":"https:\/\/dronepart.co.uk\/products\/holybro-pm08d-can-power-module-14s-200a","provider":"My Store","version":"1.0","type":"link"}