{"product_id":"holybro-pm03d-power-module-power-distribution-board","title":"Holybro PM03D Power Module \/ Power Distribution Board","description":"\u003cp\u003ePM03D provides a regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible with flight controllers that use I2C power monitor such as the Pixhawk 5X and up. It is designed for multi-rotors like the X500 V2 . It has both XT30 \u0026amp; XT60 connectors pre-installed for motor-ESCs and battery connections, as well as two 5V BECs and a selectable 8V\/12V output to suit different kinds of peripheral devices.\u003c\/p\u003e\n\u003cp\u003ePlease Note: This PM is not compatible with flight controller that uses analog PM such as the Pixhawk4, Pixhawk4 Mini, pix32 v5, or Durandal flight controllers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; play, no additional setup required for QGroundcontrol \u0026amp; Mission Planner\u003c\/li\u003e\n\u003cli\u003eXT-30 connectors and solder pads for easy motor ESC connection\u003c\/li\u003e\n\u003cli\u003eOnboard voltage regulators: two 5.2V \u0026amp; one selectable 8V\/12V\u003c\/li\u003e\n\u003cli\u003e5V\/A ports for powering companion computer or peripheral device\u003c\/li\u003e\n\u003cli\u003eSelectable 8V or 12V triple row pin header for powering peripheral device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum input voltage: 6S battery\u003c\/li\u003e\n\u003cli\u003eRated current: 60A\u003c\/li\u003e\n\u003cli\u003eMax current: 120A (\u0026lt;60 Sec)\u003c\/li\u003e\n\u003cli\u003eMax current sensing: 164A\u003c\/li\u003e\n\u003cli\u003eConnections XT-60 for battery XT-30 for motor \u0026amp; peripheral device (battery voltage Solder pads in each corner (battery voltage) CLIK-Mate 2.0mm for flight controller (5.2V\/3A standalone BEC) JST GH 4pin (5.2V\/3A, BEC shared with 5.2V triple row pin header) 2x Triple row pin header (5.2V\/3A, BEC shared with JST GH 4pin) 2x Triple row pin header (8V or 12V selectable by moving header jumper, 3A)\u003c\/li\u003e\n\u003cli\u003eXT-60 for battery\u003c\/li\u003e\n\u003cli\u003eXT-30 for motor \u0026amp; peripheral device (battery voltage\u003c\/li\u003e\n\u003cli\u003eSolder pads in each corner (battery voltage)\u003c\/li\u003e\n\u003cli\u003eCLIK-Mate 2.0mm for flight controller (5.2V\/3A standalone BEC)\u003c\/li\u003e\n\u003cli\u003eJST GH 4pin (5.2V\/3A, BEC shared with 5.2V triple row pin header)\u003c\/li\u003e\n\u003cli\u003eDimension: 84*78*12mm (excluding wires)\u003c\/li\u003e\n\u003cli\u003eMounting: 45*45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 59g\u003c\/li\u003e\n\u003cli\u003e4pin JST GH to USB Type C\u003c\/li\u003e\n\u003cli\u003e4pin JST GH to barrel plug (2.1*5.5mm)\u003c\/li\u003e\n\u003cli\u003e4pin JST GH to barrel plug (2.5*5.5mm)\u003c\/li\u003e\n\u003cli\u003e4pin Pin Dupont Cable (2pc)\u003c\/li\u003e\n\u003cli\u003eNylon standoffs \u0026amp; nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x Triple row pin header (5.2V\/3A, BEC shared with JST GH 4pin)\u003c\/li\u003e\n\u003cli\u003e2x Triple row pin header (8V or 12V selectable by moving header jumper, 3A)\u003c\/li\u003e\n\u003cli\u003e1x PM06 board\u003c\/li\u003e\n\u003cli\u003e1x 80mm XT60 connector wire (pre-soldered)\u003c\/li\u003e\n\u003cli\u003e1x Electrolytic capacitor: 220uF 63V (pre-soldered)\u003c\/li\u003e\n\u003cli\u003e1x 2.0mm pitch CLIK-Mate 6pin cable (To power flight controller)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":58941081485644,"sku":"FC-PM03D","price":49.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/Holybro-PM03D.jpg?v=1790286055","url":"https:\/\/dronepart.co.uk\/products\/holybro-pm03d-power-module-power-distribution-board","provider":"My Store","version":"1.0","type":"link"}