{"product_id":"hobbywing-xrotor-3030-combo-stack-f7-fc-65a-g2-4-in-1-esc","title":"Hobbywing XRotor 3030 Combo Stack – F7 FC + 65A G2 4-in-1 ESC","description":"\u003cp\u003eThis 30×30 flight stack combines the XRotor F7 FC and XRotor Micro 65A G2 4in1 ESC .\u003c\/p\u003e\n\u003cp\u003eXRotor F7 FC:\u003c\/p\u003e\n\u003cp\u003eThe XRotor F7 Convertible Flight Controller from Hobbywing continues to impress with its latest iteration. This is Hobbywing’s first flight controller to implement a super fast F7 MCU and the MPU6500 gyro. It also now comes with an all-new 5V \u0026amp; 12V dual BEC Circuit and a special interface for the DJI image transmission system, allowing support for both analogue and DJI digital FPV video systems. As before, it supports other useful features such the BetaFlight OSD, voltage monitoring and on-board pit switch.\u003c\/p\u003e\n\u003cp\u003eXRotor 65A ESC:\u003c\/p\u003e\n\u003cp\u003eHobbywing’s XRotor 65A G2 4-in-1 ESC raises the bar for ESCs. This 4-in-1 ESC is equipped with the latest high-performance 32-bit ARM F4 microprocessor, increasing operating frequency to 120MHZ. In addition it supports 24K-128KHz PWM frequency, which can be dynamically adjusted adjusted for precision throttle control.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eF7 FC\u003c\/li\u003e\n\u003cli\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor.\u003c\/li\u003e\n\u003cli\u003eSupports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.\u003c\/li\u003e\n\u003cli\u003eDJI image transmission system port equipped with corresponding flat cable\u003c\/li\u003e\n\u003cli\u003eSupports bidirectional DShot digital throttle communication.\u003c\/li\u003e\n\u003cli\u003eUnique installation design and shock absorption structure.\u003c\/li\u003e\n\u003cli\u003eOn-board large capacity Flash memory chip.\u003c\/li\u003e\n\u003cli\u003eOn-board 5V \u0026amp; 12V dual BEC circuit.\u003c\/li\u003e\n\u003cli\u003eOn-board Pit Switch module.\u003c\/li\u003e\n\u003cli\u003e65A 4-in-1 AM32 ESC\u003c\/li\u003e\n\u003cli\u003eAM32 open-source firmware for faster updates and feature expansion\u003c\/li\u003e\n\u003cli\u003e32-bit ARM F4 MCU running at 120 MHz for ultra-fast processing\u003c\/li\u003e\n\u003cli\u003eVariable PWM refresh rate (48–96 kHz) with dynamic adjustment\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltmeter for real-time amp and voltage monitoring\u003c\/li\u003e\n\u003cli\u003eAdjustable motor KV settings for precise throttle control\u003c\/li\u003e\n\u003cli\u003eIntegrated 4 high-performance ESCs in one compact unit\u003c\/li\u003e\n\u003cli\u003eShock-absorbing mounting holes reduce vibration impact\u003c\/li\u003e\n\u003cli\u003eHigher sustained power output for demanding flights\u003c\/li\u003e\n\u003cli\u003eSupports DShot 300\/600 and traditional PWM signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc\u003c\/li\u003e\n\u003cli\u003eCompatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003c\/li\u003e\n\u003cli\u003eMounting Holes: Convertible 20x20mm \/ 30.5×30.5mm\u003c\/li\u003e\n\u003cli\u003eProgramming via: Betaflight\/Cleanflight-configurator\u003c\/li\u003e\n\u003cli\u003eFirmware: HOBBYWING_XROTORF7CONV\u003c\/li\u003e\n\u003cli\u003eVoltage Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eCurrent Monitoring: Supported\u003c\/li\u003e\n\u003cli\u003eFC Programming: Supported\u003c\/li\u003e\n\u003cli\u003eExternal Buzzer: Supported\u003c\/li\u003e\n\u003cli\u003eBEC: 5V@1.5: 10V@1.5A\u003c\/li\u003e\n\u003cli\u003eLED Control: Supported\u003c\/li\u003e\n\u003cli\u003eUSB Port: MicroUSB\u003c\/li\u003e\n\u003cli\u003eSize: 32x32mm\u003c\/li\u003e\n\u003cli\u003eOSD: Built-in\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003cli\u003eTelemetry: Voltage \u0026amp; current monitoring via built-in voltmeter\u003c\/li\u003e\n\u003cli\u003eMounting Holes: 30.5×30.5mm, M3 with shock-absorbing design\u003c\/li\u003e\n\u003cli\u003ePWM Frequency: 48–96 kHz (auto-adjusting)\u003c\/li\u003e\n\u003cli\u003eBurst Current: 80A (per channel, 10s)\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 65A\u003c\/li\u003e\n\u003cli\u003eFirmware: AM32 (open-source)\u003c\/li\u003e\n\u003cli\u003eMCU: 32-bit ARM Cortex-M4 @ 120 MHz\u003c\/li\u003e\n\u003cli\u003eVoltage Input: 3–6S LiPo\u003c\/li\u003e\n\u003cli\u003eThrottle Signal: DShot 300\/600, PWM\u003c\/li\u003e\n\u003cli\u003eWeight: ~15g (without wires)\u003c\/li\u003e\n\u003cli\u003eBEC Output: None\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Hobbywing XRotor Micro Combo Stack – F7 FC + 65A G2 4-in-1 AM32 ESC\u003c\/li\u003e\n\u003cli\u003e1x Soft Mounting Grommets Set\u003c\/li\u003e\n\u003cli\u003e1x Signal Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":58941055861068,"sku":"FC-HWXRF765A","price":123.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1087\/9952\/5196\/files\/HW-XRotor-F7-60A-Stack.jpg?v=1790285958","url":"https:\/\/dronepart.co.uk\/products\/hobbywing-xrotor-3030-combo-stack-f7-fc-65a-g2-4-in-1-esc","provider":"My Store","version":"1.0","type":"link"}