Happymodel X12 ExpressLRS ELRS F4 12A 5-in-1 AIO FC 1-2S
£61.75
The Happymodel X12 ExpressLRS F4 12A 5-in-1 AIO is a compact all-in-one flight controller designed for high-performance 1-2S builds, including Tiny Whoops and Toothpick quads. It combines a powerful F4 flight controller, 12A 4-in-1 ESC (BLHeli_S), 2.4GHz ExpressLRS SPI receiver, 5.8GHz 40CH VTX (25–400mW), and Betaflight OSD—all on a 25.5×25.5mm whoop-style board.
The integrated SPI-based ExpressLRS receiver uses the SX1280 RF chip for reliable long-range control with low latency and supports up to 500Hz packet rate. The built-in ESCs support DShot and Bluejay firmware, and the onboard VTX is SmartAudio-ready for full control via Betaflight.
Ideal for lightweight race or freestyle setups, the X12 delivers solid performance in an ultra-compact package.
Features
- All-in-one design: FC, ESC, ELRS receiver, VTX, and OSD on a single board
- STM32F411 MCU with 100MHz and 512KB flash
- ICM20689 gyro (SPI) for low-noise, high-speed IMU performance
- Built-in 12A (15A peak) 4-in-1 BLHeli_S ESC supporting DShot and Bluejay
- Onboard SPI ExpressLRS 2.4GHz receiver with SX1280 chip
- Supports ELRS packet rates up to 500Hz
- Integrated 5.8GHz 40CH VTX with switchable power: 25mW / 100mW / 200mW / 400mW
- Betaflight OSD via SPI
- SmartAudio VTX control
- Compact 25.5×25.5mm whoop-style mounting pattern
- Compatible with 1S–2S LiPo / LiHV batteries
- Lightweight and ideal for Tiny Whoop racing or Toothpick freestyle builds
Note: Do not allow the antenna plug to touch the Motor soldering pins, as it may burn the ESC.
Specifications
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689(SPI connection)
- Original whoop size compatible (25.5mm x 25.5mm mounting)
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX 0mw~400mw
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: Z_H_30_REV16_7.HEX
- Default protocol: DSHOT300
- Support Bluejay firmware
- When use Blujay firmware with 48khz, should set startup power to 1100/1200
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHzAntenna : SMD antenna
- Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCould bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module(need to flash the same version ELRS firmware)
- Output power: 25mw~400mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels(include Race band)Smartaudio ready
- Happymodel ELRS X12 F4 5in1 AIO
- Accessories